Requesting A Call Variable From The Kdc - Philips SPENDEX 40 Operating Manual

NATO RESTRICTED
SPENDEX 40 UA 8251/00
OPERATING MANUAL
5.7
Requesting a Call Variable from the KDC
This section describes the actions to be performed in order to
request a call variable from the KDC. Requesting a call variable from
the KDC is possible only if the KDC unique variable is loaded.
Actions
LED
Display
Remarks
Start conditions:
- Terminal on hook » * » •
- CIK module connected
1. Press KDC key. "ID XXXXX"
2. Dial in ID number of "ID DDDDD"
called party.
"PRESENT " C a l l v a r i a b l e
already present.
"NO KEY "
No call
v a r i a b l e .
"ERR KEY " C a l l v a r i a b l e
n o t v a l i d .
3. Go off hook (see X"
Note 1).
4. Dial in the KDC
" 5260111"
telephone number
5260111.
5. Wait. "WAIT The KDC
protocols are
started. See
Note 2.
"XX SAVE?" C a l l v a r i a b l e
received. See
Note 3.
Now there are two
p o s s i b i l i t i e s :
- To store the call
v a r i a b l e t e m p o r a r i l y :
6. Go on hook.
» « * »
See Note 4.
- To store the call
variable permanently:
6. Dial in compartment "AB SAVE?"
number (40...59).
"AB FILLD"
Compartment
a l r e a d y fi l l e d .
9922 154 12551
NATO RESTRICTED
5-6