Sharp FLASH PATH VR-1FPN Operation Manual page 14

Using the FlashPath
The FlashPath status monitoring program (hereafter referred
to as monitoring program) is a function for displaying the
FlashPath's status.
1
"FlashPath Status" from "Programs".
When the monitoring program starts, its icon appears
on the task bar.
Monitoring program icon
2 Load the FlashPath in the FDD.
The floppy disk drive is accessed to use the monitoring
program.
Note:
¢ The FlashPath's status will not be displayed correctly if the
monitoring program is started after the FlashPath has been
accessed while the icon was not displayed on the task bar
(when the monitoring program is not started).
11