Panasonic AG-6124 Service Manual page 19

1-2. SERVICE INFORMATION
1-2-1. Emergency Cassette Removal
If the electrical circuit is defective and the action of
unloading and front unloading do not work properly, it
is possible to removing cassette manually.
There are 2 methods of removing the cassette.
A. Hand Operation
1. Remove the Bottom Plate.
Turn the worm gear to arrow mark direction by 4
finger as shown in Fig.S1 until the loading post
move to unloading position.
3. Turn the capstan rotor clockwise to take up the
tape.
4. Turn the worm gear again to eject the cassette.
CAPSTAN
LOADING
Fig. S1
1—16
Battery Operation
Remove the Bottom Plate.
Connect the battery (Manganese-Type (AA)
3pcs./+4.5V) to P1503 as shown in Fig.S2.
After moving the loading post to the unloaded
position, disconnect the battery to stop the loading
motor.
Turn the capstan rotor clockwise to take up the
tape.
Reconnect the battery to eject the cassette.
LOADING MOTOR
BATTERY
Laan
4.5V
Fig. S2
1-2-2. Hour Meter Reset
Turn off by the power key.
Connect jumper wire between TP6104 and GND
on the Main C.B.A.
Turn on unit by the power key whiles press the
tracking "+" and "-" buttons simultaneously.
Flushing the all LCD display. (approx. 4sec)
¢g
z
S
FE
S
a
FE
yg
z
Cc
<
FE
q
a
u
a
Cc