Technical data
8.2 Bidirectional plug-in transceiver SFP
8.2
Bidirectional plug-in transceiver SFP
LC connector technology (bidirectional)
The attachment to Industrial Ethernet uses LC connector
technology (Lucent Connector) with a fiber connection.
8.2.1
SFP992-1BXMT
Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
*
)
Depending on the cable used, you can find additional information in the "Industrial Ethernet / PROFINET
Passive network components" System Manual, see also section "Introduction", paragraph "Additional
documentation".
8.2.2
SFP992-1BXMR
Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
42
1000Base-BX
1000 Mbps (Gigabit Ethernet)
Multimode fiber-optic cable
Class1-LASER "Eye safe"
Transmitter (sender)
Receiver (receiver)
500 m
)
Minimum
Maximum
Sensitivity min.
Input power max.
1000Base-BX
1000 Mbps (Gigabit Ethernet)
Multimode fiber-optic cable
Class1-LASER "Eye safe"
Transmitter (sender)
Receiver (receiver)
500 m
)
Pluggable transceiver slot/
plugged in transceiver
1550 nm
1310 nm
-10 dBm
-4 dBm
-17 dBm
-3 dBm
1310 nm
1550 nm
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2023, A5E02630804-18