Locking Video Inputs; Changing The Pin Co - Toshiba COLORSTREAM 43A10 Owner's Manual

To unlock channels:
1. From the LOCKS menu, select CH LOCK.
2. Press "q or _ to display the CH LOCK menu.
3. Press A or Y to highlight CLEAR.
4. Press "q or _ until "0" replaces the channel numbers you have
locked. Note: This clears all locked channels at once. You cannot
unlock individual channels.
O LOCKS
V-C HI P
ENABLE BLOCKING ON
TV RATING _"
MPAA RATING
CH INPUT ***
12 18 26 33
NEW P IN CODE
,,I,
Locking video inputs
With the VIDEO LOCK feature, you can lock out the input sources
(Video 1, Video 2, Video 3, ColorStream) and channels 3 and 4.
You will not be able to select the input sources using the TV/VIDEO
button or Channel bnttons unless you clear the setting.
To set up the video lock:
1. From the LOCKS menu, select VIDE() LOCK.
2. Press 4 or _" to highlight the appropriate video lock mode.
O LOCKS
V-CHIP
ENABLE BLOCKING ON
TV BATING
MPAA BATING
Number
VIDE():
VIDE()+:
Locks Video 1, Video 2, Video 3 and ColorStream.
Locks Video 1, Video 2, Video 3, ColorStream, and
channels 3 and 4. This option should be used if you
use the antenna terminal to play a videotape.
Note: Ma/ee s_'e the PIP chaT_Tw/ is T_ot o T_ 3 or 4.
OFF: Unlock
Changing the P!N code
1. From the LOCKS menu, select NEW PIN CODE.
2. Press the Number buttons (0-9) to enter a 4-digit code.
The numbers you enter will replace the dashes in the display.
G LOCKS
V-CHIP
ENABLE BLOCKING ON
TV BATING
MPAA BATING
BLOCKING OPTION
CH LOCK
3. Press ENTER. The new PIN code is now active.
3O