Advertisement
A5, A15, A25
The remote supplied with the A5, A15 and A25 Radia amplifiers can be configured to:
Use system code 19, instead of code 16 to allow independent control of two ARCAM amplifiers or AVRs.
Control the playback function of an ARCAM CD player
Control the playback function of an ARCAM ST5
Alternative function selection
Press and hold the POWER and OK key for 3 seconds. LED on the remote will now stay lit.
The navigation keypad is now used to select an alternative function for the remote.
UP - Sets the system code of all keys to code 19.
LED will flash TWICE.
RIGHT - Sets the transport keys (PLAY/PAUSE, SKIP FWD, SKIP BACK) to control an ARCAM CD player. All
other keys set to system code 16.
LED will flash THREE times.
DOWN - Sets the transport keys (PLAY/PAUSE, SKIP FWD, SKIP BACK) to control an ARCAM ST5. All other keys
set to system code 16.
LED will flash FOUR times.
LEFT – Restores the remote to default settings. All keys set to system code 16.
LED will flash ONCE.
Amplifier Remote Control Codes
Key function
Power
Nav Up
Nav Left
Nav OK
Nav Right
Nav Down
Info/Menu
Vol+
Play/Pause
Music
Vol-
Skip fwd
Brightness
Mute
Skip back
4
ARCAM Radia Remote
Default Code
Alternative Code
LEFT
System/Command
System/Command
16/12
16/86
16/81
16/87
16/80
16/85
16/55
16/16
16/53
16/30
16/17
16/11
16/59
16/13
16/33
Alternative Code
UP
DOWN
System/Command
19/12
16/12
19/86
16/86
19/81
16/81
19/87
16/87
19/80
16/80
19/85
16/85
19/55
16/55
19/16
16/16
19/53
20/53
19/30
16/30
19/17
16/17
19/11
20/11
19/59
16/59
19/13
16/13
19/33
20/33
Alternative Code
RIGHT
System/Command
16/12
16/86
16/81
16/87
16/80
16/85
16/55
16/16
21/53
16/30
16/17
21/11
16/59
16/13
21/33
Advertisement
