Husqvarna DC 2-48 Operator's Manual page 23

1. Park the product on level surface and de-energize
the drive system.
2. Disconnect the power supply.
3. Open the drive chain cover.
4. Pull out the quick-release pin (A).
5. Put the quick-release pin in the storage position.
6. Close the drive chain cover.
2121 - 002 - 04.07.2023
A
7. Turn the height adjustment handles (A) to lower
the casters (B) until the drive system (C) is off the
ground.
C
To move the product with the drive
system
WARNING:
there is a risk of injury if the product falls. Be
careful when you move the product.
WARNING:
during operation.
WARNING:
steel toe-cap and non-slip sole.
1. Make sure that the pallet and the BigBag are
removed.
2. Engage the drive system. Refer to
drive system on page 21 .
3. Make sure that the parking brake is disengaged.
To engage and disengage the parking brake
Refer to
on page 9 .
A
B
The product is heavy and
Do not move the product
Use protective boots with
To engage the
23