Mute Function; Standby Mode; Error Mode - Haier I-MASTER MULTI BEVERAGE 5 Series User Manual

2. Fill the jug with the desired amount
of milk or water, [2] reading the level
indicator inside of jug. [3]
3. Place the jug onto the base. [4] [5]
4. Press the ON/OFF button on the control
panel. [6]
5. Select the desired drink button on the
control panel. The selected drink setting
will illuminate, and you will hear 2
audible beeps, [7] the heating process will
automatically start. [8]
a. Note: Do not select any drink button
when jug not in place, it will enter Error
Mode and turn off automatically. (Refer to

Error Mode)

b. Note: During preparation process,
when the jug is extracted from the base
the function is paused. When the jug is put
back in place the process resumes.
c. Note: Pressing the drink button during
preperation will stop the process.
6. When the preparation process finished, you
will hear 3 audible beeps. [9]
7. The product will automatically turn off
after 10 min. [10]
8. Carefully remove the jug from the base
and pour your drink. [11] [12]
9. Clean your jug after use and return the jug
to the base. [15]
WARNING:
Make sure the underside of the device and area
underneath the base is dry. Do not operate with a
damaged cable or plug.
For making a delicious drink, make sure that the
jug is clean and dry before use.
Milk preparation (Milk, Cold foam, Hot foam)
1. To prevent spillage, do not fill milk above
the MAX MILK level indicator.
2. For optimal milk froth use semi skimmed,
refrigerated(4-6 C) milk, Milk which has
o
been frozen will not froth.
3. See recipe table for ingredients.
Chocolate preparation
1. To prevent spillage, do not fill milk above
the MAX MILK level indicator.
2. To ensure the chocolate dissolves, it is
recommend to cut the chocolate bar into
small pieces (max 5*5mm).
3. See recipe table for ingredients.
Coffee preparation
1. To prevent spillage, do not fill water above
the MAX WATER level indicator.
2. Only use coffee powder as the ingredient.
3. When coffee is prepared, pour into your cup
through the supplied metal filter.
4. See recipe table for ingredients.
Tea & Infuse preparation
1. To prevent spillage, do not fill water above
the MAX WATER level indicator.
2. For tea bags, add bag directly into jug.
When prepared, pour water into your cup
and dispose of the teabag.
3. For Tea leaves & herbs, add the ingredients
and water.
When prepared, pour into your cup through
the supplied metal filter.
4. See recipe table for ingredients.

MUTE FUNCTION

Your product is fitted with a mute function,
this will turn off all button sounds from the
appliance.
• The mute function can be turned on by
pressing and holding the chocolate button
for 3 seconds.
• To turn off this function, press and hold the
chocolate button again for 3 seconds and
the function is deactivated.
Note: The mute function will only turn on/off
the button sound. The audible beeps indicating
start or finish of the preparation will not be
muted.

STANDBY MODE

After the heating cycle, the product will turn to
standby mode automatically, only the ON/OFF
indicator will be illuminated.
The product will automatically power off after
10 minutes of further inactivity.
ERROR MODE
When an error is detected, the product will
enter into error mode with blinking lights,
audible beeping sounds, and will turn off
automatically.
There are 3 conditions in ERROR MODE:
Temperature Sensor Error, Frother Error and
Heating Element Error. (For solutions refer to
Chapter 6)
7
GB