Table of Contents
Advertisement
20
Select the minutes for recording to start by pressing
the SET button (Forward or Reverse).
Hold down
the button to advance it rapidly.
Press the STORE
button after selecting the minute for recording to
start.
"OFF' will appear and hour starts flashing.
For example, the above diagram shows that ''30"'
minutes has been set.
Select the hour and minute to stop recording by the
same procedures described in steps 3 and 4.
For example, the above diagram shows that 'PM
10:00'' has been set.
Be sure to press the STORE button after selecting
the minute.
The current date appears and starts
flashing.
Press the Forward SET (+) button to select the day
and month of recording.
For example, the above diagram shows recording
on the 4th of June.
Notes:
¢ Day of week appears automatically.
© If you want to start recording on the current day,
simply press the STORE button.
© The above diagram shows how to record a pro-
gramme on a single day. To record a programme
at the same time on every day or to record it on
one
certain
day
of
each
week,
follow
the
procedure described below.
,
After setting the day and month press the STORE
button.
The programme indicator flashes and the
display shows both start and stop times in a few
seconds.
Then display shows start time and date.
Finally the display returns to normal together with
lighting programme number.
NOTES:
|
'
To record a programme at the same time every
day.of the week or to record a programme on a
specified day at the same time each week, per-
form the following step instead of step 6 above.
To record at the same time every day of the
week
Press the Reverse SET {—) button once.
All day
indicators light.
If you press the button twice or more, press the
button until all day indicators light.
Hold down
the button to advance rapidly.
Then press the STORE button.
To record on a specified day at the same time
each week
Press the Reverse
SET
(—) button until the
desired
day indicator
lights along with
letters
"WKL"..
Hold down the button to advance it
"rapidly.
Then press the STORE button.
Now, one programme has been completed.
7
Turn
off
the
OPERATE
OPERATE
switch.
The "@)" indicator
i
will come on.
[=]
co
Notes:
1. If the erase prevention tab
is removed,
the cassette
is ejected
automatically
and ''@)" indicator will flash.
Stick a piece of
cellophane tape over the erase prevention hole
on the cassette to enable recording.
2. The '"@" indicator will flash, if a cassette is not
inserted.
Advertisement
Table of Contents
