Sony HANDYCAM DCR-DVD610 Operating Manual page 81

You call select tile maximtlm zoom level ill
case you want to zoon/greater than optical
zoom magnification. Note that the image
quality decreases whm/you use the digital
zoom.
Wrll E }T
The right side of the bar shows the digital
zooming hLctor. Tile zooming zone appears
when you _lect the zooming levch
DCR-DVD610
I_OFF
Up to 40 × zoom is perfornled optically.
80,,
Up to 40 _.zoom is performed optically, and
after that_ up to 80 × zoom is perfi)rmed
digitally.
2000x
Lip to 40 × zoom is performed optically_ and
after that, up to 2f}00 × zoom is performed
digitally.
DCR-DVD71 O/DVD8I O
I_OFF
Lip to 25 × zoom is performed optically.
50×
Up to 25 x zoom is performed optically_ and
after that, up to 50 × zoom is perfi)rmed
digitally.
2000x
Lip to 25 × zoom is performed optically, and
alter that, up to 2f}00 × zoom is performed
digitally.
You can compensate for camera shake. Set
[STEADYSHOT] to [OFF] ('@") when
using a tripod (optional), then tile image
becomes natural. The default setting is
IONI.
When recording ill dark places, the shutter
speed is automatically reduced to 1130
second. The default set/ing is [ON].
You can display the Dame and check that
tile subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISP/
BATT INFO to make the frame disappear.
The def:mlt setting is [OFF].
"_° Tips
• Positioning the subject at the cross point otthe
guide frame makes a balanced coml)osilion.
I_ON
Always displays Ihe remaining media
capacity indicator.
AUTO
Displays the remaining recording time of
movie lk)rabout 8 seconds in the following
situations.
When your camcorder recognizes the
remaining medil capacil} when the
POWER swilch is set to _ (Movie).
When you press DISP/BATT INFO to
switch the indicator from off to on when
the POWER switch is set to _ (Movie).
When you select the movie recording
mode on the HOME MENU.
3
E:
=_
g
3
g
Continued.._
81