Haier DV-V20 User Manual page 47

1: Turn the power on, and set the camcorder to the Capture mode.
2: Press the MENU button to display the capture menu, and then press
the LEFT or RIGHT buttons select [Shooting] Menu.
3: Press the UP or DOWN buttons to select the items [Self Timer] or
[Multi-Snapshot]. And press the OK button to launch the submenu:
Off: Don't use self-timer without delay.
Self-timer 2S: The shutter release will delay for 2 seconds.
Self-timer 5S: The shutter release will delay for 5 seconds.
Self-timer 10S: The shutter release will delay for 10 seconds.
Burst: Press the shutter button once to take three pictures
continuously.
4: Press the UP or DOWN buttons to select the desired item, and then
press OK button to confirm the setting and close the menu.
5: Press the SHUTTER button to take picture.
Recording audio
1: Turn on the camcorder and set the camcorder to audio record mode
( ).
2: Press the SHUTTER button to start recording.
3: Press the SHUTTER button again to end the recording. If the memory is
full the video camera will stop recording automatically.
46