Cassette Recorder; Cassette Playback - Philips AZ1027 User Manual

Cassette Recorder

Cassette playback

1 Adjust the Source selector to TAPE.
2 Press 9/ to open the cassette holder and
insert a cassette, and close the deck.
3 Press 1 to start playback.
4 To pause playback, press 8. To resume, press
the key again.
5 To stop the tape, press 9/.
Fast forwarding/rewinding
1 Press 5 / 6 until you reach your desired
passage.
2 Press 9/ to stop fast forwarding/rewinding.
Helpful hints:
– During playback, the keys are automatically
released at the end of a tape and the set is
switched off (unless 8 mode has been
activated.)
– During fast forwarding/rewinding, the keys will
not be released at the end of a tape. To switch
off the set, make sure the cassette keys are also
released.
General information on recording
• Recording is permissible insofar as copyright
or. other rights of third parties are not
infringed.
• For recording, use only NORMAL type
cassettes (IEC type I) on which the tabs have
not yet been broken.This deck is not suited
for recording on CHROME (IEC II) or
METAL (IEC IV) type cassettes.
• The best recording level is set automatically.
Altering the VOLUME or DBB will not
affect the recording.
• To protect a tape from accidental erasure,
break out the tabs. If you wish to record again,
cover the tabs with a piece of adhesive tape.
CD synchro start recording
1 Select CD source.
2 Insert a CD, or if desired, program track
numbers.
3 Press 9/ to open the cassette holder. Insert
a blank tape and close the deck.
4 Press 0 to start recording.
• Playing of the disc/programme starts
automatically from the beginning.You don't
need to manually start the disc player.
5 For brief interruptions, press 8. To resume
recording, press 8 again.
6 To stop recording, press 9/.
Recording from the Radio
1 Select TUNER source.
2 Tune to the desired radio station (see Radio
reception).
3 Follow steps 3-6 under CD synchro start
recording.