Download Print this page
Nokia FastMile 5G Gateway Quick Start Manual

Nokia FastMile 5G Gateway Quick Start Manual

Advertisement

Quick Links

Nokia FastMile 5G Gateway - Quick
Start Guide
Setting up your Nokia FastMile 5G Gateway is quick and easy!
Note: Make sure your device is Powered Off before starting the set-up process.
What's Included?
Nokia FastMile 5G gateway
How to Setup Rogers 5G Home Inter...
Watch on
Step 1: Download the Nokia WiFi App
If it's your first time setting up your FastMile 5G Gateway, download the Nokia WiFi App to your
phone or tablet and sign in using your MyRogers credentials.
Step 2: Insert the SIM card
Make sure the device ISN'T powered on when inserting the SIM card. If the device is powered on,
remove the plug before proceeding. 
Check if the SIM card was pre-installed by your service provider. If not, follow these steps to insert
your SIM. 
Flip device over. 
Remove SIM tray from bottom of device. 
Place SIM securely in tray. 
Reinsert tray back into device. 
Disclaimer: Wireless Business Internet SIM name only appears in English at launch
Step 3: Scan QR code
Using the Nokia WiFi App, scan the QR code on the bottom of your device.
Step 4: Power on
Plug in your Nokia FastMile 5G Gateway and push the ON/OFF button. 
LED lights will appear on top of your device once it's powered on. 
Wait 30–60 seconds so the Gateway can search for a 5G signal.
Step 5: Check light status for connectivity
Use the Nokia WiFi App to check signal strength. You can also check signal strength by viewing the
LED lights on top of your device. 
All three (3) LED lights means there's a very good signal strength
Two (2) LEDs means good signal strength 
One (1) LED means weak signal strength 
To improve your signal strength, you can do the following: 
Move the location of your device (higher is always recommended). 
Move your device close to a window or outer wall with few obstructions. 
Note: Press the TEST button on the side of your Gateway to check the signal strength at any time. 
Step 6: Connect to Wi-Fi
It's time to connect to your Wi-Fi network! 
Use the default SSID and Wi-Fi key printed on the bottom of your Nokia FastMile 5G Gateway to
connect your devices. 
Step 7: Change Wi-Fi network name and
password
Use the Nokia WiFi App to change your Wi-Fi name and password anytime!
If you would like to change them now, follow these steps: 
Open the Nokia WiFi App. 
Tap the Home Network card on the home screen. 
Select the edit icon on the bottom to load the 'Change Wi-Fi' screen. 
On the top right, click the pencil icon to change the Wi-Fi name and password of your network. 
After you've made your changes, tap the check mark to save your changes. 
Note: After changing your Wi-Fi name and password, you'll need to connect your devices using your
new Wi-Fi credentials.
Power Cable/Adaptor
Watch later
Share

Advertisement

loading

Summary of Contents for Nokia FastMile 5G Gateway

  • Page 1 Watch on Step 1: Download the Nokia WiFi App If it’s your first time setting up your FastMile 5G Gateway, download the Nokia WiFi App to your phone or tablet and sign in using your MyRogers credentials. Step 2: Insert the SIM card Make sure the device ISN'T powered on when inserting the SIM card.
  • Page 2 Rocket Hub 5G transition - FAQs  We’re upgrading customers on 4G internet service to 5G. To seamlessly transition you to your Wireless Business Internet, we’ll add a new 5G line to your account at no extra cost for 60 days. We’ll also send you a new 5G device for free.
  • Page 3 Nokia WiFi app features  The Nokia WiFi app provides you with all the features you need to easily manage your home network! Use this mobile app to gain insight into coverage around your home, your Wi-Fi speed, set up family profiles, avoid disruptions and more.
  • Page 4  Fastmile 5G Gateway 3.2 Learn how to factory reset or reboot your Gateway using the steps below: Rebooting or resetting the Nokia Fastmile 5G Gateway 3.2 Reboot the gateway: You may locate the reset button on the bottom of the Gateway next to the Nano SIM tray.
  • Page 5: Connecting Ethernet

    Connecting Ethernet You can connect up to two Gigabit Ethernet LANs by connecting the cable from the Ethernet LAN to either of the two Gigabit Ethernet LAN connectors on the backside of the Nokia FastMile 5G Gateway 3.2.  Difficulties connecting? LED signal test results and actions If the 5G LED is lit and all three-signal strength LEDs are lit, it means you have a good 5G connection.
  • Page 6 As with all Wi-Fi access points, once the password is changed, users will have to “forget” the Nokia access point in the Wi-Fi settings of all devices previously connected to it via Wi-Fi, scan for Wi-Fi access points and add it back with the new password.