18. ENVIRONMENTAL CONCERNS..............40 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Page 4
1.2 General Safety This appliance is for washing domestic-type, machine- • washable laundry only. This appliance is designed for single household • domestic use in an indoor environment. This appliance may be used in, offices, hotel guest • rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
ENGLISH approved by AEG (see more details in chapter "Accessories - Stacking kit"). 2. SAFETY INSTRUCTIONS 2.1 Installation 2.2 Electrical connection The installation must comply WARNING! with relevant national Risk of fire and electric regulations. shock. • Remove all the packaging and the •...
Page 6
• Do not use an extension hose if the has been discontinued: motor and inlet hose is too short. Contact the motor brushes, transmission between Authorised Service Centre for the motor and drum, pumps, shock replacement of the inlet hose.
• The steam has a quick and easy way that is not an accessory supplied by to refresh the clothes. The gentle AEG, secure the appliance in the fixing steam programmes remove odours plates. and reduce creases in dry fabrics so Read carefully the instructions supplied they need little ironing.
The rating plate reports the model name (A), product number (B), electrical ratings (C) and serial number (D). Mod. xxxxxxxxx Prod.No. 910000000 00 000V ~ 00Hz 0000 W 00000000 4. TECHNICAL DATA Dimension Width/ Height/ Total depth 59,6 cm /84,7 cm /60,2 cm...
Page 9
ENGLISH CAUTION! Do not lay washing machine on its front. 3. Put the appliance back into an upright position. Remove the power supply cable and the drain hose from the hose holders. 5.2 Positioning and levelling 1. Install the appliance on a flat hard floor.
Page 10
When the appliance is installed on a plinth or a tumble dryer is stacked on the washing machine, use the accessories described in chapter 'Accessories'. Read carefully the instructions supplied with the appliance and with the accessory. WARNING! The inlet water shall not exceed 25 °C.
Page 11
ENGLISH You can extend the drain hose to maximum 400 cm. Contact the authorized service centre for the other drain hose and the extension. It is possible to connect the drain hose in different ways: 1. Make a U shape with the drain hose and put it around the plastic hose guide.
Read carefully the instructions supplied with the accessory. Only appropriate accessories approved by AEG ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated. 6.2 Stacking kit The tumble dryer can be stacked on the...
ENGLISH 7. CONTROL PANEL 7.1 Control panel description 11 10 Programme dial Stains/Prewash skipping touch button Display Plus Steam touch button Time Save touch button Extra Rinse touch button Delay Start touch button Spin reduction touch button Option skipping touch button •...
Page 14
Rinsing phase indicator. It flashes during rinse phase. Spinning and draining phase indicator. It flashes during spin and drain phase. Anti-crease phase indicator. Read the paragraph Plus Steam for more details. Steam phase indicator. The digital indicator can show: •...
ENGLISH 8. DIAL AND BUTTONS 8.1 On/Off When the display shows the indicators , the appliance does not heat Pressing this button for a few seconds the water. allows to activate or deactivate the appliance. Two different tunes sound 8.4 Spin while switching the appliance on or off.
Page 16
8.6 Option The display shows the indicator The door stays locked. The drum With this button you can select one of the turns regularly to reduce creasing. following options: You must drain the water to unlock • Skipping wash phase - Rinse Only the door.
ENGLISH 8.10 Delay Start unlocks. User at any moment can terminate the anticrease phase by: With this option you can delay the start of • pressing the On/Off button for a few a programme in a more convenient time. seconds to activate or deactivate the Touch the button repeatedly to set the appliance;...
Page 18
Programme Programme description Cotton, synthetic and mixed items. Special steam cycle without Steam washing that can be used to prepare your dried laundry for ironing or refreshing garments worn once. This programme reduces crea‐ ses, odours and relaxes the fibres. Do not use any detergent.
Page 19
ENGLISH Programme temperature, maximum spin speed and maximum load Default tempera‐ Maximum load Reference spin ture Programme speed Temperature Spin speed range range 30 °C 1600 rpm MixLoad 69min 5 kg 60 °C - 30 °C 1600 rpm - 400 rpm Eco 40-60 1600 rpm 8 kg...
Page 21
Steam programme does not perform any hygienic cycle. Do not set a The fragrance dose bottles steam programme with the following type are available on AEG web of items: shop or by authorised • Items that are not suitable for tumble dealer.
10. SETTINGS 10.1 Child Lock seconds (within 10 seconds after the switching on. After these 10 seconds, With this option you can prevent children the key combination activates and from playing with the control panel. deactivates the acoustic signals).
ENGLISH 3. Pour a small quantity of detergent This removes all possible dirt from the drum and the tub. into the compartment marked 4. Set and start a programme for cotton at the highest temperature without any laundry in the drum. 12.
Page 24
Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum indicated level ( ). This quantity will however guarantee the best washing results. After a washing cycle, if necessary, remove any detergent residue from the detergent dispenser.
Page 25
ENGLISH The display shows the maximum 1. Touch the Start/Pause button to declared load for the programme, the pause the appliance. The related default temperature, the default spin indicator flashes. speed, the washing phase indicators 2. Touch the Delay Start button (when available) and an indicative repeatedly until the display shows the programme duration.
Page 26
12.10 Interrupting a programme again. The ProSense Technology phase can be repeated up to programme and changing the three times (see point 1). options Important! If the laundry amount will not When the programme is running, you be reduced, the washing programme can change only some options: starts anyway, despite the overload.
Page 27
ENGLISH In the display the related door lock 4. Keep the door and the detergent indicator goes off. dispenser slightly ajar to prevent mildew and odours. 5. Close the water tap. 12.14 Draining water out after end of cycle If you have chosen a programme or an option that does not empty out the water of the last rinse, the programme is completed, but:...
• You do not use the appliance for 5 Turn the programme dial to set a new minutes before you touch the Start/ cycle. Pause button. If you set a programme or an Press the On/Off button to activate option that ends with water the appliance again.
ENGLISH 13.3 Detergent type and • sudsing, • reduced washing effect, quantity • inadequate rinsing, • a greater impact for the environment. The choice of detergent and use of correct quantities not only affects your 13.4 Ecological hints wash performance, but also helps to avoid waste and protect the environment: To save water, energy and to help •...
Page 30
14.1 Periodic cleaning 14.3 External cleaning schedule Clean the appliance with mild soap and warm water only. Fully dry all the Periodic cleaning helps to extend the surfaces. Do not use a scouring pads or life of your appliance.
Page 31
ENGLISH drained out with the water. Regularly Occasionally, at the end of a examine the seal. Coins, buttons, other cycle the display may show small items can be recovered at the end the icon : this is a of the cycle. recommendation to perform the “drum cleaning”.
Page 32
Use a small brush WARNING! to clean the recess. • Do not remove the filter while the appliance operates. • Do not clean the pump if the water in the appliance is hot. Wait until the water...
Page 33
ENGLISH 180˚ 5. When the bowl is full of water, turn 11. Put the filter back into the special the filter back and empty the guides by turning it clockwise. Make container. sure that you tighten the filter 6. Repeat the steps 4 and 5 until the correctly to prevent leakages.
45° 20° 2. Remove the inlet hose from the 14.11 Emergency drain appliance by loosening the ring nut. If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain pump' paragraph. If necessary, clean the pump.
Page 35
ENGLISH 15.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check. With some problems, the display shows an alarm code and the Start/Pause button may flash continuously: Problem Possible solution...
Page 36
If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. In case of different problem with the washing machine check the table below for possible solutions. Problem Possible solution •...
ENGLISH Problem Possible solution • Increase the detergent quantity or use a different detergent. • Use special products to remove the stubborn stains before The washing results you wash the laundry. are not satisfactory. • Make sure that you set the correct temperature. •...
Page 38
Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. Values and programme duration may differ depending on different conditions (e.g. room temperature, water temperature and pressure, load size and type of laundry, supply voltage) and also if you change the default setting of a programme.
Clean the filter regularly and, especially, if the alarm code appears on the display. 17.3 Programmes Programmes Load Product description MixLoad 69min Cotton and synthetic items. This programme ensures a 5 kg good washing performance in a short time.