Mitsubishi Electric AE-200A/AE-50A Instruction Book page 66

Item
Energy management
data
WT07139X01
[Data type: 1-month intervals]
Row Item
1st File Type 504
2nd Data range *1 Start year and month + "–" + End year and month
"DateTime,Data1(51),...Data1(100),Data3(51),...Data3(100),
OutdoorTemp(51),...OutdoorTemp(100),CoolSetTemp(1),...CoolSetTemp(50),
HeatSetTemp(1),...HeatSetTemp(50),RoomTemp(1),...RoomTemp(50),
FanTime(1),...FanTime(50),CoolTime(1),...CoolTime(50),
HeatTime(1),...HeatTime(50),ThermoTime(1),...ThermoTime(50),
CoolThermoTime(1),...CoolThermoTime(50),
HeatThermoTime(1),...HeatThermoTime(50),
3rd Item *5
SaveValue(1),...SaveValue(50),CoolSaveValue(1),...CoolSaveValue(50),
HeatSaveValue(1),...HeatSaveValue(50),
ApporionedElectricEnergy(1),...ApporionedElectricEnergy(50).
TargetElectricEnergy(1),...TargetElectricEnergy(50),
MCP1(1),...MCP1(50),MCP2(1),...MCP2(50),MCP3(1),...MCP3(50),
MCP4(1),...MCP4(50),MCT1(1),...MCT1(50),MCT2(1),...MCT2(50),
AHC1(201),...AHC1(250),AHC2(201),...AHC2(250)"
Measurement
4th
unit *2*3*4*5
yyyy/mm
Outdoor temperature (51), ... (100), Cooling set temperature (1), ... (50),
Heating set temperature (1), ... (50), Room temperature (1), ... (50),
Fan operation time (1), ... (50), Cooling operation time (1), ... (50),
Heating operation time (1), ... (50), Thermo-ON time (1), ... (50),
5th–
Data
Cooling Thermo-ON time (1), ... (50), Heating Thermo-ON time (1), ... (50),
29th
*5*6*7*8*9
Capacity-save value (1), ... (50), Cooling capacity-save value (1), ... (50),
Heating capacity-save value (1), ... (50), Apporioned electric energy (1), ... (50),
Target electric energy (1), ... (50), MCP 1 (1), ... (50), MCP 2 (1), ... (50),
MCP 3 (1), ... (50), MCP 4 (1), ... (50), MCT 1 (1), ... (50), MCT 2 (1), ... (50),
AHC temperature 1 (201), ... (250), AHC temperature 2 (201), ... (250)
*1 The date will appear in the format that has been set on the Basic System settings screen, accessible
via the Web Browser for Initial Settings.
*2 The temperature unit °C or °F will appear, depending on the temperature unit that has been selected
on the Basic System settings screen, accessible via the Web Browser for Initial Settings.
*3 The measurement unit for MCP (PI controller) will be the measurement unit that has been set on the
Measurement screen, accessible via the Web Browser for Initial Settings.
*4 The measurement item for MCT (AI controller) will be temperature or humidity, which has been set
on the Measurement screen, accessible via the Web Browser for Initial Settings.
*5 The separator character and decimal point character selected on the Measurement screen
(accessible via the Web Browser for Initial Settings) will be used to the data.
*6 "Outdoor temperature," "Cooling set temperature," "Heating set temperature," and "Room
temperature" in the data are the average monthly values of the average temperature values
obtained every day.
*7 "MCT 1" and "MCT 2" in the data are the average monthly values of the average temperature or
humidity values obtained every day.
*8 The value will not appear if the data does not exist.
*9 Each file contains up to 25 data (25-month worth of data).
Description
Format
Item
ApportionedElectricEnergy, TargetElectricEnergy
Data1, Data3
OutdoorTemp, CoolSetTemp, HeatSetTemp,
RoomTemp
FanTime, CoolTime, HeatTime, ThermoTime,
CoolThermoTime, HeatThermoTime, SaveValue,
CoolSaveValue, HeatSaveValue
MCP (PI controller)
MCT (AI controller)
AHC (Advanced HVAC CONTROLLER)
*1
, Data 1 (51), ... (100), Data 3 (51), ... (100),
66
Unit
kWh
-
ºC, ºF
Minute
kWh, m3, MJ
ºC, ºF, %
ºC, ºF