Yamaha 190 FSH Sport 2017 Owner's/Operator's Manual page 53

Mode" flashes in the LCD, the no-wake
mode is activated.
1 Plus side " "
No Wake
TIP:
The no-wake mode can be set to 3 engine
speeds. To adjust the engine speed while the
no-wake mode is activated, push the plus side
or minus side of the no-wake mode/cruise as-
sist switch.
1
Mode
Instrument operation
To deactivate the no-wake mode:
Perform one of the following operations.
Push the minus side of the no-wake
●
mode/cruise assist switch until the LCD re-
turns to the normal display.
1 Minus side " "
Push the remote control lever forward to
●
open the throttle.
Cruise assist
The cruise assist feature is for steady engine
speed operation when the boat is traveling
above no-wake speeds. The cruise assist is
available for use whenever the engine is run-
ning above 3000 rpm and below 7000 rpm.
To activate the cruise assist:
(1) Push the remote control lever forward to
open the throttle until the desired engine
speed is reached.
(2) Push the plus side or minus side of the
no-wake mode/cruise assist switch.
1
47