Related Manuals for Bosch WQB246DAFG
Summary of Contents for Bosch WQB246DAFG
- Page 1 Translated from German to English - www.onlinedoctranslator.com Tumble dryer WQB246DAFG [en] Instructions for use and assembly...
-
Page 2: Table Of Contents
Further information and explanations can be found online: Table of contents 1 Security ........4 8 Dry target ........ 28 1.1 General information ....4 8.1 Changing the drying target....28 1.2 Intended 8.2 Adjust drying target ..... 28 use ........... 4 9 programs ........ - Page 3 22 Technical data ....56 14.2 Setting up Home Connect ..38 14.3 Home Connect menu .... 38 23 Declaration of Conformity ...57 14.4 Activate Wi-Fi on the device ..39 14.5 Deactivate Wi-Fi on the device .. 39 14.6 Resetting the network settings of the device....
-
Page 4: Security
deSecurity 1 Security Please note the following safety instructions. 1.1 General information ¡Read these instructions carefully. ¡Save the instructions and product information later use or subsequent ownership. ¡Do not connect the device if it is damaged during transport. 1.2 Intended use Use the device only: ¡to tumble dry textiles that have been washed with water dry and refresh. -
Page 5: Safe Installation
Securityde 1.4 Safe Installation WARNING - Risk of electric shock! Improper installations are dangerous. ▶ Only connect and operate the device in accordance with the information on the nameplate. ▶ Only connect the device to an alternating current power supply via a properly installed earthed socket. - Page 6 deSecurity WARNING - Danger of fire! Using an extended power cord and unauthorized adapters is dangerous. ▶ Do not use extension cables or multiple socket strips. ▶ Only use adapters and power cables approved by the manufacturer. ▶ If the mains connection cable is too short and a longer mains connection cable is not available, contact a specialist electrician to adapt the house installation.
-
Page 7: Safe Use
Securityde CAUTION - Danger of injury! The device may vibrate or move during operation. ▶ Place the device on a clean, flat and firm surface. ▶ Align the device using the device feet and a spirit level. There is a risk of tripping if hoses and power cables are installed incorrectly. - Page 8 deSecurity ▶ Do not use steam cleaners, high-pressure cleaners, hoses or showers to clean the device. WARNING - Danger of damage to health! Children can become trapped in the device and endanger their lives. ▶ Do not place the device behind a door that blocks or prevents the device door from opening.
- Page 9 Securityde WARNING - Danger of fire! The refrigerant R290 in this device is environmentally friendly but flammable and can ignite if it comes into contact with open flames or ignition sources. ▶ Keep open flames and ignition sources away from the device. WARNING - Danger of explosion! Residue in the lint filter can ignite when drying.
-
Page 10: Safe Cleaning And Maintenance
deSecurity ▶ Do not place objects on the appliance door. Interfering with the rotating drum can cause injury to your hands. ▶ Before taking action, wait for the drum to come to a complete standstill. 1.6 Safe cleaning and maintenance WARNING - Risk of electric shock! Improper repairs are dangerous. -
Page 11: Avoid Material Damage
Avoid property damagede Clean the device only with water ▶ Avoid material damage and a soft, damp cloth. ▶ If you come into contact with the device, immediately remove any detergent DANGER! residue, spray mist or residue. Incorrect dosing of fabric softeners, detergents, care products and cleaning agents can impair the 3 environmental protection and... -
Page 12: Energy Saving Mode
deSetting up and connecting → "Dispose of packaging", After drying, clean the lint filter → page 11 Page 35 . Check the device for visible damage. aA contaminated lint filter at least alters the air flow in the device, Open the door. extends the program duration and Remove the accessories from the increases energy consumption. -
Page 13: Requirements For The Installation
Setting up and connecting Requirements 4.3 Requirements for the Installation location installation location In a laundry This device only Dry column with the original DANGER! len connection If the device is tilted beyond 40°, set of drying residual water in the device may leak manufacturer in and cause property damage. - Page 14 deSetting up and connecting water drain hose to drain excess Pull the condensation water hose from condensation water directly into the the connector. wastewater. Hints ¡Operate this device with the included water drain hose. → "Connecting the water drain hose", page 14 If you connect the water drain hose, you do not have to regularly empty the condensation water container.
- Page 15 Setting up and connectingde Push the water drain hose onto Insert the plug into the hollow the connector as far as it will on the top. Push in the condensation water container → Page 37 . Empty the condensation water container →...
-
Page 16: Aligning The Device
Setting up and connecting 4.5 Align the device times 80 cm and maximum 100 cm To reduce noise and vibration, align Fix height. the device correctly. A notice:With the Y distributor → Page 32 can- To align the device, turn the ▶... - Page 17 Setting up and connectingde ¡Place the removed door on a Unscrew the door hinge and door a flat and soft surface to avoid hook. material damage. Remove door Requirement:The device is disconnected from the mains. Open the door. Unscrew the door. Screw the door hinge and door hook on opposite sides.
- Page 18 deSetting up and connecting Screw on the door hinge cover. Change door lock Unscrew the door lock cover. Make sure not to pinch or damage the door seal. Remove the door lock. Remove the colored door handle indicator and replace it with the cover on the opposite side.
-
Page 19: Connect The Device Electrically
Setting up and connectingde Screw on the door lock cover. Screw on the door. 4.7 Connect the device electrically Plug the power plug of the device's power cord into a socket near the device. The connection data of the device can be found which you can find in the technical data →... -
Page 20: Getting To Know Each Other
Get to know 5 Get to know 5.1 Device Here you will find an overview of the components of your device. Depending on the device type, details in the picture may vary, e.g. B. Color and Shape. Condensation container Ventilation opening →... -
Page 21: Control Panel
Get to knowde 5.2 Control panel You can use the control panel to set all of your device's functions and receive information about its operating status. Programs → Page 29 Change setting value When you activate certain settings, the Program selector → Page 33 display shows selection buttons and Buttons →... -
Page 22: Display
display 6 display In the display you can see the current setting values, selection options or information texts. Example display Description Advertisement 0:40 Expected program duration or remaining time of the program in hours and minutes. Recommendation of the maximum load quantity for the set program in kg. - Page 23 displayde Description Advertisement ¡lights up: the device is connected to the home network via Wi-Fi factory connected. ¡flashing: the device is trying to connect via Wi-Fi to connect to your home network. → "Home Connect", page 38 Settings that are not available on the device were set via the Home Connect app.
-
Page 24: Buttons
de Keys 7 Keys H Here you will find an overview of the buttons and their setting options. Description Selection button ¡start Start the program, shut down break or pause. When is ¡cancel displayed, ¡pause you can pause the program. When is displayed, you can start the program. - Page 25 Keysde Description Selection button Favorite ¡save If you press the button for ¡set approx. 3 seconds, you will save your individual program settings. positions. → "program setting save positions", Page 34 If you press the button briefly, you set your program with individual program settings.
- Page 26 deKeys Description Selection button SpeedPerfect ¡activate Shortened program duration it activate or deactivate. ¡deactivate A notice:Energy consumption increases. This does not affect the drying result. pregnant. Take drugs Séchage ¡activate Gentle drying activate or deactivate. ¡deactivate delicate The temperature is reduced for sensitive textiles, e.g.
- Page 27 Keysde Description Selection button activate After washing your SmartDry laundry in the washing machine, ben, you will find a suitable one at the dryer program for drying recommended for washing. A notice:The washing machine schine must be Home Connect-capable. The washing machine and that Dryers must be included connected to the home network...
-
Page 28: Dry Target
Dry target 8th Dry target F A drying target is specified for every automatic program. The dry target determines how dry or damp your laundry is after the end of the program. Dry target Laundry Drying result The laundry is dry. Multi-layered, thick layers ash that dries poorly. -
Page 29: Programs
programsde 9 programs S You can wash your textiles either with an automatic program or with one Dry time program. 9.1 Automatic programs Tips Automatic programs are programs in which moisture sensors measure the ¡Select the drying target residual moisture of the laundry while depending on the textiles or the it is drying. - Page 30 deprograms program Description max. loading charge (kg) ¡If you dry pillows and that If the pillow is not completely dry after the end of the program, dry the pillow using a timed program. → "Time programs", page 31 Hygiene plus Dry durable and boil-proof textiles made of cotton and linen.
-
Page 31: Time Programs
programsde 9.2 Time programs Time programs are programs with a fixed or adjustable program duration. The program ends after the time has elapsed, even if the laundry is e.g. B. is not yet dry. Time programs are suitable for drying individual items of laundry or thin textiles. -
Page 32: Accessories
Accesories 0 accessories v use original accessories. It is tailored to your device. A notice:Some accessories are available in other colors. Contact the → "Customer Service", page 54 . Order number Connection set Device to save space WTZ27510 a suitable washing machine machine of the same Manufacturer and set up with the same width and... -
Page 33: Laundry
Laundryde press. ▶ 1 1 laundry The switch-on process takes a few seconds. 11.1 Prepare laundry A notice:The drum lighting goes out automatically. DANGER! Objects left in the laundry can 12.2 Setting the program damage the laundry and the drum. Press the desired program. -
Page 34: Saving Program Settings
deBasic operation A notice:The program settings are not 12.6 Start program permanently saved for the program. Requirement:A program is set. → "Setting the program", page 33 12.4 Save program settings press. ▶ aThe display shows the program You can save your individual duration or the program end time. -
Page 35: Put The Device Into Standby Mode Zen
Basic operationde Remove the two-part lint filter. 12.10 Device in standby mode (standby mode) by). press. ▶ 12.11 Lint filter During drying, the lint from the laundry is collected in the lint filter. The lint filter protects the device from lint. -
Page 36: Condensation Water Container
deBasic operation Open the two lint filters. Close the two lint filters and put them together. Remove the lint. Insert the two-part lint filter. Clean the two lint filters 8th. thoroughly with warm running water and dry them. Close the door. 12.12 Condensation water container During drying, condensation is... -
Page 37: Parental Control
Parental controlsde Condensation container Empty the condensation water container push in When the drying program has ended or the display shows a message Push the condensation water ▶ during operation, empty the container in as far as it will go. condensation container. -
Page 38: Home Connect
deHome Connect Start the Home Connect app and 1 4 Home Connect set up access for Home Connect. This device is network capable. The Home Connect app guides you Connect your device to a mobile through the entire registration device to operate functions via the process. -
Page 39: Activate Wi-Fi On The Device
Home Connectde 14.4 Activate Wi-Fi on the 14.7 Remote Start device Enable the device for remote start via the Home Connect app. requirements ¡The Home Connect menu is on- Notice called. For safety reasons, remote start is → "Open the Home Connect menu", disabled under the following page 38 conditions:... -
Page 40: Intelligent Program Recommendation
deHome Connect ¡There is no data from the last one 14.8 Intelligent program washing program. The data is recommendation stored for 24 hours and then deleted. After you have washed your laundry ¡The washing program has been canceled in the washing machine, the dryer broken. - Page 41 Home Connectde ¡Status of any previous previous reset to factory settings. This initial registration prepares you to use the Home Connect functionalities and is only required at the time you want to use Home Connect functionalities for the first time. A notice:Please note that the Home Connect functionalities can only be used in conjunction with the Home Connect...
-
Page 42: Basic Settings
Basic settings 1 5 basic settings S You can adjust the basic settings of your device to suit your needs. 15.1 Overview of the basic settings basic Description Selection positive position End signal 0 (off) Adjust the volume of the signal after the 1 (quiet) end of the program. -
Page 43: Changing Basic Settings
Equipment carede 15.2 Change basic settings Prepare the condensation container for device care If you drain the device's condensation water via the drain hose, prepare the To access the basic settings, click condensation water container before Instellingen Preferencespress. cleaning the device. Remove the plug from the top Select the desired basic setting. -
Page 44: Carry Out Simple Device Maintenance
deEquipment care OnInstellingen Preferences Pull out the condensation water press. container horizontally and empty it. → Set the program to position 5. "Empty the condensation water container", page 37 If you drain the condensation using aThe display shows alternately the drain hose: "CP1"... -
Page 45: Cleaning And Care
Cleaning and carede Start intensive device care Continue intensive device care Fill approx. 1.5 liters of warm tap water requirements into the condensation water ¡Device care is prepared. → container. "Preparing for device care", page 43 Keep the filled condensation ¡Device care is called. -
Page 46: Humidity Sensor
deCleaning and care Clean the moisture sensor with a with water and sponge. a damp one Wipe with cloth. All detergent Fresh filing residues, spray leave remains or become easier residues so- without residue remove. continue to remove. The device door The remaining water after usage can dry... - Page 47 Cleaning and carede Remove the filter. Clean the filter with running, warm water or in the dishwasher. Push the filter in as far as it will go. Push in the condensation water container. → "Insert the condensation water container", page 37...
-
Page 48: Troubleshooting
Troubleshooting 8 Troubleshoot problems K You can fix minor problems with your device yourself. Use that Troubleshooting information before contacting customer service. This way you avoid unnecessary costs. WARNING Danger of electric shock! Improper repairs are dangerous. Only trained specialist personnel may carry out repairs on the device. ▶... - Page 49 Troubleshootingde Cause and troubleshooting Disturbance Device paused, but Cooling process active. the drum rotates No error - no action necessary. ▶ itself. Different causes are possible. Home Connect works Go to www.home-connect.com. ▶ not working properly according to the regulations. No connection with Wi-Fi is turned off.
- Page 50 deTroubleshooting Cause and troubleshooting Disturbance and program Lay the water drain hose without kinks. canceled. Water drain hose is not connected correctly. Make sure the water drain hose is connected ▶ correctly. → "Connecting the water drain hose", page 14 Water drain hose is blocked.
- Page 51 Troubleshootingde Cause and troubleshooting Disturbance Drying time is too Ambient temperature is lower than 15°C. long. Make sure the ambient temperature is above 15°C. ▶ Insufficient air circulation where the device is installed. ▶ Ventilate the installation location of the device. The ventilation opening of the device is blocked.
- Page 52 deTroubleshooting Cause and troubleshooting Disturbance Laundry is too damp. Set a time program for drying. ▶ → "Programs", page 29 Humidity sensor contaminated. → "Cleaning the moisture sensor", page 46 . ▶ Drying process stopped and condensation container filled. → "Empty the condensation water container", page 37 . →...
-
Page 53: Transport, Storage And Dispose Of
Transport, storage and disposalde Make sure not to kink the water 9 transport, drain hose. Storage and disposal Empty the condensation water container → Page 37 . Push in the condensation water 19.1 Prepare the device for container → Page 37 . transport Disconnect the device's power plug 8th. -
Page 54: Customer Service
deCustomer service You can obtain information about 20.1 Product number (E-No.), current disposal routes from your production number specialist dealer or your local or city (FD) and counting number administration. (Z-No.) This device complies with European standards The product number (E-No.), the Directive 2012/19/EU production number (FD) and the about old electrical and... -
Page 55: Consumption Values
Consumption valuesde 1 consumption values D as program Katoen Eco Co The actual values may differ from the (marked by stated values depending on the type sound Eco "Arrow") is suitable for drying normally of fabric, composition of the laundry to wet cotton laundry and is the most be dried, residual moisture in the efficient in terms of energy... -
Page 56: Technical Data
deTechnical data Per- program slingshot energy loading dung the- catch gram- giever moisture (kg) need rotary moisture duration (h:min) (kWh/ number (U/ Cycle) minutes) 1000 4:20 1.44 Katoen Eco Coton 1000 2:36 0.80 Katoen Eco Coton 4:51 1.64 Katoen Eco Coton 2:54 0.90 Katoen Eco Coton... -
Page 57: Declaration Of Conformity
2014/53/EU. ambient temperature 5°C temperature ¡Maximum: You can find a detailed RED declaration 35°C of conformity online at www.bosch- home.com on the product page of 145cm Length of the network your device among the additional connecting cable documents. This product contains light sources of energy efficiency class F. - Page 60 Contact data of all countries are listed in the attached service directory. BSH Hausgeräte GmbH Carl-Wery-Strasse 34 81739 Munich, GERMANY www.bosch-home.com A Bosch Company *9001797310* 9001797310(030904)