Procedure 3: Running Adjustments Simulation
Perform the following Simulations:
Simulation 3-10: Adjustments
•
Review the "Adjustments and Settings" Section in the BP FN11/12 Service Manual:
ADJ 1 - Punch PWB Destination Setting
•
ADJ 2 - Punch Position Adjustment
•
Congratulations! You have completed this exercise. Return to your seat for review.
Service Success Center: https://service.sharpamericas.com/
Sharp Academy: https://satech.sharpamericas.com/Sharp-Academy
Questions? Contact us at success@sharpsec.com
Page 3