Sony Blu-ray Disc BDP-S470 Operating Instructions Manual page 33

• Some files may not play depending on the format,
the encoding, or recording condition.
• Some files edited on a PC may not play.
• The player can recognize the following files or
folders in BDs, DVDs, CDs and USB devices:
up to folders in the 5th tree
up to 500 files in a single tree
• Some USB devices may not work with this
player.
• The player can recognize Mass Storage Class
(MSC) devices (such as flash memory or an
HDD) that are FAT-compatible and non-
partitioned, Still hnage Capture Device (SICD)
class devices and 101 keyboard (front USB .jack
only).
• To avoid data corruption or damage to the USB
memory or devices, turn the player off when
connecting or removing the USB memory or
devices.
• The player may not play high bit rate video files
on DATA CDs smoothly. You are recommended
to play such files using DATA DVDs.
By connecting Sony components that are
compatible with the "Control for HDMI"
function with an HDMI cable (not supplied),
operation is simplified as below:
• One-Touch Play
With one touch of the following buttons, the
connected TV turns on and the input
selector on the TV is switched to the player
automatically.
-li_
- HOME: The home lilenu appears
automatically (page 10, 16, 20).
- _ PLAY:
Playback starts automatically.
•
System
Power-Off
When you turn off the TV using -TV- I/(._)
orthe power button on the TV's remote, the
player and HDMI-compatible components
turn off
automatically.
• Theater
When you press
THEATER, the player
automatically switches to the optimum
video mode for watching movies. When
connected with a Sony AV amplifier
(receiver) using the HDMI cable, the
speaker output also switches automatically.
When connected with a Theater Mode-
compatible TV using the HDMI cable, the
TV's video mode switches to Theater
Mode. Press the button again to return to the
original setting.
•
Language
Follow
When you change the language lBr the on-
screen
display
on your
TV, the player's
language
l_r the on-screen
display
is also
changed after turning the player
off and on.
To prepareforthe BRAVIA Sync features
Set "Control for HDMI" to "On" in the
"System Settings" setup (page 25).
For details on settings of your TV or other
connected components, refer to the
instruction manual supplied with the TV or
components.
m.
m
m.
,_,continued
33