Advertisement
Settingthe Ontimer
To set the On timer to turn on the monitor
automatically:
SS
MENU
Pre._'s O and open tile Timer menu.
2
Press • or • to highlight On Timer.
3
Press the Number buttons (0-9) or • or • to enter the
length of time until the monitor turns on automatically.
You can set the On timer in 10-minute increments, up to
12hS0m (12 hours and 50 minutes).
EXIT
Press © to start the timer.
Sleep
Timer
POWE
R
Press _) to turn off themonitor.
The monitor will turnon automatically after the lengthof
time you set in the On timer.
Note:
• Whena power failure occurs, the On timer settings may be
cleared.
° To display the amount of time remaining on the On timer
RECALL
(while the monitor is still on), press o •
Displayingthe monitor's settings
on-screen using RECALL
To display
the monitor's
settings
on-screen:
SS
RECALL
Pre.;.' O on the remote control.
The following information will display on-screen
(if applicable):
• VIDEO mode selected
• Remaining time of On/Sleep timer (if set)
• Video label (if set)
• V-Chip rating status
• Picture size
TV-PG
On
Timer
10ha4m
Sleep
Timer
fh23m
Full
Video
1
VGR
To close the RECALL
screen:
_S
RECALL
*
Pre.v
O agam.
Understanding the last mode
memory feature
If the power
is cut off while you are viewing
the monitor,
the Last Mode Memory
feature
automatically
turns on the
monitor
when the power
is resupplied.
Note: You should unplug the monitor's power cord if it is
possible that you will be away from the monitor for an extended
period of time after the power is restored, This will prevent the
monitor from turning on in your absense.
39
Advertisement
