Table of Contents
Advertisement
Fitting the adjustable feet
Beforehand:
1.Remove all parts that are not permanently fixed, especially the pan supports and burners.
2.Remove the accessories from the oven.
Proceed as follows:
1.Tilt the appliance by raising one side slightly from the floor.
2.With the plates in position, screw the adjustable feet into the mounting holes on the
underneath of the appliance.
3.Repeat the process on the other side.
You can make the final adjustments to the feet in order to level the appliance once the
gas and electricity supply have been connected.
If it is necessary to pull the appliance, screw the adjustable feet in fully. Make the final
settings only when the other installation tasks have been completed.
EN-8
Advertisement
Table of Contents
