Hitachi DIGITAL 8 VM-D965LE Service Manual page 4

Caution:
Before servicing this camera/recorder (before initializing EEPROM), check the IEEE1394 ID No. by the following
procedure:
Be sure to input the IEEE1394 ID No. after initializing the EEPROM.
1. 1IEEE1394 ID No. Check Method
(3) Refer to display 1.
(4) Press A key.
(5) Refer to display 2.
Note: For "DATA INITIALIZE", see "7.1 Data Maintenance" in CHAPTER 3.
(6) Press 2 key.
(7) Refer to display 3.
(8) Press 1 key.
(9) Refer to display 4. ID No. will appear: Make a note of it.
(10)Press any key.
IMPORTANT:
2. 1IEEE1394 ID No. Input Method
IMPORTANT:
Be sure to perform this task after initializing the EEPROM.
Before Starting input:
(3) Refer to display 1.
(4) Press A key.
(5) Refer to display 2.
Note: For "DATA INITIALIZE", see "7.1 Data Maintenance" in CHAPTER 3.
Display & Figs
Display 1
Display 2
Display 3
MAIN MENU
" DATA MINTENANCE MENU
/EEE1394 1D MINTENANCE MENU
MANUAL ADJUSTMENT PROGRAM
DATA MAINTENANCE
IEEE1394 ID MAINTENANCE
RRRR RI HIIIIKR ERIE IR IA IIIS IIAK IIIS ISIE
[A] | DATA MAINTENANCE
[B} | ADJUSTMENT
[C] | AUTOFOCUS
[D} | VCR ADJUSTMENT
[E] STABILIZER
[F] | SPOT NOISE
*
RR KIA KK RIA III KIKI IRIS IIASA RER IIA.
i] DATA INITIALIZE
[2] IEEE1394 MAINTENANCE
[ESC] RETURN TO MAIN MENU
Please select [1] - [2] or [ESC]
Display 4
Pe eee << CURRENT CHIP_ID
ae
rca ad
DATA LOADING>>
ae
CHIP_IDH= 00
viease setevt [At s In or ESGh 2) CHIP_IDL= 00000000
PRESS ANY KEY
FH KRIKI ARAKI RIKI KIKI III IKE IAI KIII III IIIISA
{1] LOAD CURRENT CHIP_ID
[2] REWRITE CHIP_ID
[3] WRITE CHIP_ID
[ESC] RETURN TO MAIN MENU
Please select [1] - [2] or [ESC]
CAUTION-3