Honeywell HN300401 Series User Manual page 87

30 Series Network Video Recorder User Guide
Camera Name: The editable field for the camera name.
Cloud Recording: Enable the Cloud Recording option to push the camera recordings to
MAXPRO Cloud.
The are five types of recordings: Continuous Recording, Event Recording (alarm input
triggered recording), Motion Recording (motion triggered recording), User driven recording
(manual recording from live view on MPC), and Rule driven recording (recording triggered by
a rule, such as which camera motion will set another camera recording). Apart from
continuous recording, clips for the other four types of recordings are pushed to the cloud
when this option is enabled.
Manual Camera Addition: Select the Manual Camera Addition checkbox and change the
Protocol, Camera Model, Camera IP address, Port, Username and Password parameters
and click Save to manually add a camera.
Discover Cameras: Click the Discover Cameras button to discover cameras. The cameras
discovered from the network are displayed in the Discovered Cameras drop-down list. You
can add the discovered cameras by entering only the username and password as the other
parameters are automatically populated.
The Door Association and Zone Association features do not
Note
correspond with 30 Series NVR.
5. Click the play button to perform live preview for the camera. Cameras with MFZ function
support focus, zoom, and autofocus. Click the stop button (at the bottom-left) to stop the
live preview.
Figure 6-60 Live Preview
Recording Clip Duration: Set the Pre Event and Post Event recording duration in seconds for
a event trigger, motion trigger, user driven, or rule driven Recording. The clip length will
include Pre Event and the Post Event. Pre Event and Post Event can be set to a maximum of
70