Turning The Answering Function On Or Off; Setting A Beep For.incoming Messages - Sony IT-A100 Operating Instructions Manual

To set the phone to answer
incoming calls, turn on the
When you record your own
greeting, the answering a IND/ANN ONLY
function will be turned on
automatically. In this case, skip : f Message counter
this section. : (IT-A200)
RECORDING
0 indicator (IT-A100)
ANSWER indicator
(IT-A100)
Set AUDIBLE IND/ANN ONLY to the desired
position.
To turn the ANN ONLY mode on, set it to ANN ONLY
ON.
To turn the standard mode on, set it to ANN ONLY OFF or
AUDIBLE IND ON.
2
1
Ita ficscauatetnore than Press ANSWER ON/OFF.
seconds long, it will be counted The answering function is turned on.
as one message.
(T-A100: The ANSWER indicator flashes if there are any
If nothing is recorded for 7
messages or lights if there is none in the standard
seconds after the recording mode
mode. The ANSWER indicator flashes in the
starts, the phone recognizes that ANN ONLY mode.
there i . ee ree
(T-A200: The message counter shows the number of the
messages from "0" to "19" in the standard mode
or "A" in the ANN ONLY mode.
B® To turn off the answering function
Press ANSWER ON/OFF so that the ANSWER indicator (IT-
A100) or the message counter (IT-A200) goes off.
ST =hadlale MoM ol-1-) oMcolmiarcelealiole Maatsett-\6 [21
the switch to AUDIBLE IND OFF.
22 | Using as a telephone answering machine