Sony PHV-A7 Operating Instructions Manual page 15

Vole Talorclo mm @lolcve-hilole
oem cremenetramttaennenetite tin sm atten: tee ae
flow. 1.to Adjust the Brightness:
1 Press the IRIS PUSH/MANUAL button.
IRIS
pinch Lights up
~ (manual.)
M E E CLose| OPEN
Bi | ae {—»
You can adjust for inadequate brightness to a certain extent, even if it
was due to under exposure when the picture was taken.
(For negative film. The
effect is opposite for
positive film)
Notes on the iris adjustment
This unit automatically adjusts the iris using the brightest part of the object
that the lens is focused on. In the following cases, the automatic iris may not
function. In such cases, adjust it manually.
¢ The film on the film carrier is not placed properly, and the light has hit the
light source directly.
¢ The picture has changed due to zooming or trimming.
¢ The original film was extremely over or under exposed.
¢ The original film has too much contrast.
When you zoom the picture, the white balance level may change. To
avoid such change, use this function.
Press the WHT BAL PUSH HOLD button.
WHT BAL
PUSH HOLD Lights
p (hold
mode.)
The white balance level does not change when you press the ZOOM
button to change the size of the picture.