Pinch Roller; Pressure Adjustment - Sharp RG-7050E Service Manual

, PINCH ROLLER PRESSURE ADJUSTMENT (Figure 13—1)
1. . With power supply turned on, push
the point (A) with a tension gauge
TENSION
to make the
pinch roller apart
GAUGE
from the
capstan shaft. | Then,
(0~500g)
gradually release the tension gauge ao
and read its value when the pinch
roller starts to rotate.
2. It is normal that the tension gauge
reads 250 ~ 300g. If the above CAPSTAN SHAFT \
value. is not satisfied,.change the
~~
setting position of Pinch Lever
Spring.
PINCH ROLLER
PINCH LEVER SPRING
Figure 13—1
Figure 13—2
—13—