Table of Contents
Advertisement
Installing the BTS3900C Cables
a
Installing the Cables through the cable hole
1. Remove the outer screw
from the waterproof unit.
2. Remove the waterproof
unit from the cable trough.
3. Lead the cable to be installed from the
bottom of the cable trough to the
corresponding cable hole in the waterproof
unit. Do not link the connector of the cable to
any port.
4. Link the connectors of the cables to the
ports on the corresponding devices after
all the cables are lead through the cable
holes of the waterproof unit.
For details about the cable holes, cable routes, and
installation methods, see the following installation
procedures.
19
Advertisement
Table of Contents
