Table of Contents
Advertisement
Related references
Optional Equipment and Replacement Parts
Cleaning the Print Head Cap Area
If the print head is clogged and automatic cleaning does not fix the issue, you can clean the print head
and the area around the caps using the optional cleaning sticks (part number C13S090013).
Caution: Before beginning the cleaning process, note the following:
• Do not touch any circuit boards or any parts inside the printer besides those which need to be cleaned.
Doing so may cause the printer to malfunction or print quality may decline.
• Always use new cleaning sticks, or dirt may be transferred into the printer.
• Do not touch the tip of the cleaning stick. This may reduce the cleaning effect.
• Touch a metal object before cleaning to discharge any static electricity.
• Do not use an organic solvent such as alcohol to wipe the caps, as it may damage the print head.
• Do not move the print head by hand. Doing so could damage the printer.
• If paper is loaded in the printer, remove it.
1. On the LCD screen, select the
The print head moves to the cleaning position.
2. Select How To... and then follow the on-screen instructions.
3. Select Done to return the print head to its home position.
Parent topic:
Related references
Optional Equipment and Replacement Parts
Related tasks
Removing Roll Paper
Moving or Transporting Your Product
If you need to move or transport your product, prepare it as described here.
Caution: During transportation and storage, follow these guidelines:
• Avoid tilting the product, placing it vertically, or turning it upside down; otherwise ink may leak.
maintenance icon > Capping Station/Wiper Cleaning > Start.
Maintenance and Transportation
198
Advertisement
Table of Contents
