Auto Operation - Panasonic SH-FX65 Operating Instructions Manual

#,
oo
o
i
Refer also to the operating instructions for your home theater unit.
1
Turn on the wireless system.
Unit on/off button [POWER = I, • _]
Use this button to turn the unit on and off.
I: The unit is on. • _: The unit is off.
AUTO OPERATION ON/OFF indicator
The indicator lights red when the unit is turned on and lights green
when the wireless link is activated.
When the wireless link is inactive for a long time, it turns red.
2
3
Turn on your home theater unit and check the wireless
link indicator on the home theater unit.
e.g. Display on the home theater unit
" Wl "or an indicator should light up.
• If" _ "or an indicator is flashing,
refer to page 7, Troubleshooting guide.
Start play on the home theater unit.
Conserving power
The wireless system consumes a small amount of power, even when it is
off (approx. 0.2 W). To save power when the unit is not to be used for a
long time, unplug it from the household AC outlet.
• Pairing with existing SH-FX85 (notincluded)
Your SE-FX65 can be used with SH-FX85, both operating on the same
wireless system as SH-FX85. By pairing, you can enjoy the benefits of
both systems working together simultaneously.
Preparation
*Use the SH-FX85T transmitter card for pairing,
Store your SH-FX65T transmitter card in a cool dry place for later use.
*Make sure that the speaker and AC cord connections on page 5 are
completed.
*Turn on the home theater unit and SH-FX85, and then reduce the
volume.
1 Turn on SE-FX65.
2 While pressing [1_1_/1_1_t] on the home theater unit
press the numbered button [3] on the remote control until "P" lights
in the home theater unit's display.
• The indicator on SE-FX65 turns green.
3 While "P" is displayed, press [I/D SET].
I/DSET
Use a pointed object.
4 While pressing [l_l_/l_l_l] on the home theater unit,
press the numbered button [3] on the remote control.
• " _" or the wireless link indicator lights on the home theater unit.
5 Turn off and on SE-FX65.
• Make sure the indicator on SE-FX65 lights up green.
Repeat the above steps if you should use SH-FX65T transmitter card
(the link with SH-FX85 will be disconnected).