Working Advice; Led Worklight; Suspension Device; Belt Clip - Bosch GRG18V-3600C Operating/Safety Instructions Manual

Problem Toolbox
App
Display
Warning
Message
Error
message

Working Advice

The power tool with built-in Bluetooth® Low
Energy Module is equipped with a radio in-
terface. Local operating restrictions, e.g. in
aircraft or hospitals, must be observed.
In areas in which the Bluetooth® wireless
technology must not be used, the Bluetooth®
Low Energy Module must be switched off via
the app.

LED Worklight

The LED Worklight 13 improves visibility in
the immediate work area. It is automatically
switched on when the On/Off Switch 12 is
pressed.
160992A8AK GRG18V-3600C 20230616.indd 15 160992A8AK GRG18V-3600C 20230616.indd 15
Operation
Display Cause
Color
Yellow Jaws 17 worn
Yellow Rechargeable battery 9
state of charge weak
Yellow Rechargeable battery 9
almost overheated
Yellow Electronics almost over
almost overheated
Yellow Jaws 17 not in working/
neutral position
Red Rechargeable battery 9
state of charge critical
Red Rechargeable battery 9
overheated
Red Electronics overheated
Red Jaws 17 jammed
-15-
Corrective Measure
Check and, if required, replace the Jaws 17
Replace or charge the rechargeable battery 9
Replace or charge the battery 9
Switch off the power tool and allow it to
cool down for 3–5 minutes until the status
indicator 11c lights up green
Switch off the power tool and allow it to cool
down until the status indicator 16 lights up
green
Press the on/off switch 12 so that the Jaws 17
return to the working/neutral position
Replace or charge the rechargeable battery 9
immediately
Replace the rechargeable battery 9
immediately
Switch off the power tool immediately and
allow it to cool down for 3–5 minutes until the
status indicator 11c lights up green
Switch off the power tool immediately
and allow it to cool down until the status
indicator 11c lights up green
Clean the Jaws 17 and, if required, replace
them

Suspension Device

You can use the Hanging Ring 3 to attach the
power tool to a suspension device (e.g. on a
production line).
To do so, fold the Hanging Ring 3 upwards.
Regularly check the condition of the hanging
ring and the catch in the suspension device.

Belt clip

You can use the Belt Clip 7 to conveniently
secure the power tool to your belt.
or
or
6/16/2023 7:50:14 PM 6/16/2023 7:50:14 PM