Philips 5000 Service Manual page 15

PHI 5000
Reset to the default settings
RESET
Alarm signals summary: red display
Display
Warnings signals summary
Display
Only OTC
START
QUICK
CLEAN
It is possible to restore the default settings through the programming
menu. The machine must be turned on and ready to work.
Press the MENU button and scroll through functions list to select the
>
RESET function.
Press the OK button to select the function.
>
When the change has been implemented, the OK message will be
displayed.
Press the ESC button to exit the programming function.
>
The machine automatically exits the programming mode if no button is
pressed for 3 minutes.
Description
Put back the drip tray
and coffee grounds
drawer; close the
service door.
Coffee bean
hopper empty.
Brew group not
inserted.
Description
The machine is ready to
brew products: coffee
bean hopper empty
If the filter signal starts
blinking, the AquaClean
filter must be replaced.
The machine is waiting
to start the water circuit
priming process.
The milk carafe ducts
should be cleaned.
Display
Water tank empty.
The machine is out of
XX
Display
The machine must be
START
START
START
CALC
CALC
CALC
CLEAN
CLEAN
CLEAN
The machine is heating
The machine is rinsing.
Brew group rebooting.
01 INTRODUCTION
Description
Coffee grounds
drawer full.
service.
Description
descaled.
up.
11/9