Table of Contents
Advertisement
Antenna
connections
FM outdoor antenna
750
coaxial
cable
|
FM
indoor antenna
@ AM
loop antenna
Install the AM loop antenna on the supplied loop antenna
hoider and place it on a shelf, etc., or install tt on the rack
or wall with screws. Rotate the AM
loop antenna to the
G2
right or left for best reception.
Keep the speaker
leads and AC cords
away from the AM
loop antenna.
Note:
Do not place the AM loop antenna on the unit. As this unit
employs a computing device, placing the AM loop antenna
on the unit may result in noise generation. Place the AM
loop antenna away from the unit.
@ AM outdoor antenna
In steel buildings or at a great distance from the transmit-
ter, it may
be necessary to install an outside longwire
antenna.
The
end
of this wire
should
be stripped
of
insulation and connected to the AM terminal. At this time,
keep the loop antenna connected.
AM outdoor antenna
AM
loop
antenna
@ FM outdoor antenna
It is recommended
to install an
exclusive
FM
outdoor
antenna to capture FM broadcasts with high sound qual-
ity. Use a coaxial cable for the connection
between
the
outdoor antenna and FM ANTENNA
terminal on the rear
panel. For the connection between the coaxial cable and
FM
ANTENNA
terminal,
please refer to the illustration
above.
HFM
indoor antenna
In areas where FM waves are strong, FM broadcasts can
be received by connecting the supplied T-shaped antenna
as shown in the illustration above. However, as FM waves
are
susceptible
to external
radio
interference
causing
distortion,
it is recommended
to use an exclusive
FM
outdoor antenna.
® To minimize auto-ignition noise, locate the antenna as
far from heavy traffic as possible.
®@ Keep the feeder or coaxial cable as short as possible.
Do not bundle or roll up excess cable.
@ The antenna should be at least two meters (6.6 feet)
from reinforced concrete walls, or metal structures.
FM outdoor antenna setting
KT-59 (En)
7
i
|
Advertisement
Table of Contents
