Disposal Of The Packaging; Operation - Silvercrest SEMK 105 A1 Operating Instructions Manual

Disposal of the packaging

The packaging protects the appliance from damage during carriage.
The packaging materials have been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste that is generated. Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites.
NOTE
If possible, keep the original packaging during the warranty period so
►
that the appliance can be properly packed for returning in the event of a
warranty claim.

Operation

Before starting to use the appliance, ensure that ...
the appliance, power plug and mains cable
–
all packaging materials and protective films have been removed from
–
the appliance.
Clean all parts of the appliance as described in the section entitled
♦
"Cleaning and care".
Insert the plug into a suitable mains power socket. The control lamp
♦
flashes green. The appliance is in standby mode.
The appliance is now ready for use.
CAUTION! PROPERTY DAMAGE!
If you have moved the appliance, wait around 2 hours before using it again.
►
Make sure that the ambient temperature is between 10 and 32 °C.
►
SEMK 105 A1
are in perfect condition and ...
GB │ MT │
45 ■