Advertisement
2-4 Electric schematic diagram
2-4 Instructions
Notes:
Do not disassemble the machine yourself. This operation should be performed by professional personnel
at authorized service centers or local dealerships.
Instructions for first use
1. Open the package, place the machine on a stable surface and place the
water tray and remove the protective cover of the water nozzle.
2. Steps to remove the water tank:
2.1 Remove the water tank cover;
2.2 Lift the handle of the water tank and pull the water tank outward, and
then lift it out after it disconnect with the base.
3. Water filling:
Fill the water tank with tap water to the maximum level.
4. Install the water tank:
4.1 Align the water tank with the base socket and press down;
4.2 Cover the water tank with the cover, ensuring that the top of the water
tank cover is aligned with the top of the machine.
5. Rinse filter:
5.1 Put the water tank back into the machine, and the "Flushing" light will
flash. The machine will start to flush the filter automatically for 5 minutes.
5.2 When it finishes filter flushing, it will beep for 3 times. "Flushing" icon will
be half-lit state., and the "Water" icon will flash. At this time, it is necessary
to pour out all the water in the water tank and refill it to the highest water
level.
5.3 Repeat steps "5.1" and "5.2" for a total of 3 times.
7
Advertisement
