Sony IPELA PCS-XG55S Installation Manual

Installation Guide
Let's Connect
Notes
ˎ
Be sure to turn off all the equipment before making any connections.
ˎ Do not connect/disconnect the camera cable, interface cable, or pen tablet with
the power on. Doing so may damage the Camera Unit, Communication System
or ISDN Unit.
ˎ
For safety, do not connect the 100BASE-TX/10BASE-T connector to a network
that applies excess voltage via the 100BASE-TX/10BASE-T connector.
ˎ
Used with the Camera Unit or ISDN Unit for the first time, the Communication
System may automatically upgrade the software of the connected equipment.
Upgrade the software according to the message displayed on the monitor
screen. Be sure not to turn off the Communication System or disconnect the
cable during upgrading. Otherwise it may cause a malfunction of the system.
Front
VIDEO IN
YPbPr
2)
Video cable Audio
cable
to video
to audio output
output
(YPbPr)
HD player, etc.
© 2010 Sony Corporation
Printed in Japan
PCSA-CXG80 HD Camera
Unit (supplied with the
PCS-XG80/XG55) 1)
PCSA-CXA55 HD Camera
Unit (supplied with the
PCS-XA80/XA55)
to TERMINAL
Camera cable (supplied with
the HD Camera Unit)
EC-MIC(A7)
AUDIO 2 IN TABLET
1/2
2)
2)
Pen tablet
(Wacom )
PCSA-A7 Echo Canceling Microphones
2)
(PCSA-A7P4: 4-piece set)
* I - 4 1 7 9 4 3 4 1 3 4 *
HD Visual Communication System PCS-XG80/XG80S/XG55/XG55S/XA80/XA55
4-179-434-13 (1)
1) Supplied
(However, the PCSA-CXG80 HD Camera Unit and the PCS-A1 microphones are not supplied with the PCS-XG80S/
XG55S system. The PCS-XG80 is supplied with two PCS-A1 microphones, and the PCS-XG55 is supplied with one.
Microphones are not supplied with the PCS-XA80 and the PCS-XA55.)
2)
Not supplied
3)
Must support 1080i.
TV monitor 2) 3)
to HDMI IN
HDMI cable
CAMERA
Rear
MIC(A1/A3)
1(R)/2(L)
S VIDEO
AUDIO 1 IN
IN
Audio cable
PCS-A1
Microphones S-video cable 2)
(supplied with
the PCS-XG80/
1)
XG55)
to S-video
or
output
PCSA-A3
2)
Microphones
VCR, etc.
Notes
ˎ
The PCS-XG55/XG55S/XA55 is not equipped with the following connectors:
Connecting two
S VIDEO IN, EC-MIC(A7) 1/2, AUDIO 1 IN, EXT 1/2 and
microphones enables pick-
ˎ
On the PCS-XG55/XG55S/XA55, the TABLET, AUDIO 2 IN, and
up of the sound in stereo. respectively. In addition, the LAN 1 ALERT and LAN 2 ALERT indicators are named the LAN ALERT and ON LINE indicators, respectively.
ˎ Normally, connect the UTP cable to the
connector, some of the functions of your system may be restricted.
For details, refer to the Operating Instructions supplied with the system.
ˎ The REC OUT jack is used to make an audio recording of a communication. This is not used during regular communication.
2)
ISDN Unit
PCSA-B384S
to TERMINAL
Interface
to ISDN 1 - 3
cable
(supplied
with the
ISDN Unit)
1)
HDMI OUT ISDN UNIT
ISDN modular cable
DC 19.5V
RGB IN RGB 1
OUT
AC adaptor
2)
UTP cable (category 5, straight)
Connecting cable
with the D-sub 15 pin
connectors 2)
to audio output
to
RGB
OUT
Computer
2 (LAN2) connectors
1 connectors are named the OPTION, AUDIO IN, and
1 (LAN1) connector (indicated in green). If the UTP cable is connected to the
"IPELA" and
2)
or
2)
PCSA-B768S
to ISDN 1 - 6
ISDN line
2)
1)
Power cord 1)
to a wall outlet
2)
LAN
Connecting cable with the
2)
D-sub 15 pin connectors
to RGB IN
Projector, etc.
connectors,
2 (LAN2)
are trademarks of Sony Corporation.