®
Enable HDMI
ARC or eARC
®
HDMI
ARC, or on selected TVs, eARC, is the audio return channel that is available on one of the TV's
®
HDMI
ports. The audio return channel enables you to send Dolby Audio™ or DTS audio content back to a
home theater receiver that is also sending an audio and video signal into the TV. Using HDMI
reduces the number of cables needed and controls the volume and mute state of the receiver while
watching TV.
®
HDMI
ARC or eARC is disabled by default. To enable it, in the Home screen menu, navigate to Settings >
System > Control other devices (CEC), and then highlight HDMI ARC.
Enable 1-touch play
1‐touch play enables a device to control which TV input is active. For example, pressing Play on your
Blu‐ray™ player switches the TV to the Blu‐ray™ input.
1‐touch play is disabled by default. To enable 1‐touch play, in the Home screen menu, navigate to
Settings > System > Control other devices (CEC) and highlight 1‐touch play . Press OK to enable or
disable the feature.
Enable system standby
The system standby feature causes other devices to power off when you power off your TV. Depending
on the CEC System Standby implementation, it also might enable connected devices to power off your
TV when you power off the device.
System standby is disabled by default. To enable system standby, in the Home screen menu, navigate to
Settings > System > Control other devices (CEC) and highlight System standby . Press OK to enable or
disable the feature.
Restart the TV
You can restart the TV when necessary. Restarting has the same effect as unplugging the TV power and
then plugging it in again.
To restart the TV, navigate to Settings > System > Power , and then select System restart . Highlight
Restart , and then press OK to confirm restart.
114
®
ARC or eARC