Table of Contents
Advertisement
All manuals and user guides at all-guides.com
To Create a Smart Connect™ Event
1
From your Homescreen, tap
2
If you are opening Smart Connect™ for the first time, tap OK to close the
introduction screen.
3
On the Events tab, tap
4
If you are creating an event for the first time, tap OK again to close the
introduction screen.
5
Add conditions you want to trigger the event under. A condition could be the
connection with an accessory, or a specific time interval, or both.
6
Tap
to continue.
7
Add what you want to happen when you connect an accessory, and set other
settings as desired.
8
Tap
to continue.
9
Set an event name, then tap Finish.
To add a Bluetooth® accessory, you have to first pair it with your device.
To Edit a Smart Connect™ Event
1
Start the Smart Connect™ application.
2
On the Events tab, tap an event.
3
If the event is switched off, drag the slider to the right to turn it on.
4
Tap Edit event, then adjust the settings as desired.
To Delete an Event
1
Start the Smart Connect™ application.
2
On the Events tab, touch and hold the event you want to delete, then tap Delete
event.
3
Tap Delete to confirm.
You can also open the event you want to delete, then tap > Delete event > Delete.
Managing Accessories
Use the Smart Connect™ application to manage a range of smart accessories you can
connect to your device, including Xperia™ SmartTags, a SmartWatch series watch, or a
wireless headset from Sony. Smart Connect™ downloads any necessary applications
and also finds third-party applications, when available. Previously connected accessories
are shown in a list that allows you to get more information about the features of each
accessory.
To Pair and Connect an Accessory
1
Start the Smart Connect™ application. If you are opening Smart Connect™ for
the first time, tap OK to close the introduction screen.
2
Tap Accessories, then tap
3
Turn on the Bluetooth® function if it is not already on, then tap the name of the
accessory that you want to pair and connect with.
4
If required, enter a passcode, or confirm the same passcode on both your device
and the accessory.
To Adjust the Settings for a Connected Accessory
1
Pair and connect the accessory with your device.
2
Start the Smart Connect™ application.
3
Tap Accessories, then tap the name of the connected accessory.
4
Adjust the desired settings.
Using your device as a fitness hub with ANT+™
You can use your device with health and fitness products that also support ANT+™
technology. For example, if you go running with an ANT+™ compatible heart rate
monitor and a foot pod (to measure pace and distance), you can collect all the data from
This is an internet version of this publication. © Print only for private use.
, then find and tap
.
.
108
.
Advertisement
Table of Contents
