Table of Contents

Advertisement

Quick Links

Washer dryer
WDU28560GR
Instruction Manual and Installation Instructions
en

Advertisement

Table of Contents
loading

Summary of Contents for Bosch WDU28560GR

  • Page 1 Washer dryer WDU28560GR Instruction Manual and Installation Instructions...
  • Page 2 Your new washer dryer Display rules : Warning! You have chosen a Bosch washer dryer. This combination of symbol and signal Please take a few minutes to read and word indicates a possibly dangerous become familiar with the advantages of situation.
  • Page 3: Table Of Contents

    Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Dyeing/bleaching .
  • Page 4: Intended Use

    Intended use Sensors ....41 Intended use Unbalanced load detection system . 41 This appliance is intended for private ■ I n t e n d e d u s e domestic use only.
  • Page 5: Safety Instructions

    Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■...
  • Page 6: Installation

    Safety instructions Keep packaging, plastic film The mains voltage on your ■ and packing components away power socket must match from children. the rated voltage specified on the appliance Warning (identification plate). The Risk of poisoning! connected loads and the Detergents and care products required fuse protection are may result in poisoning if...
  • Page 7 Safety instructions circuiting or fire due to Warning overheating. Risk of injury! The mains cable must not be The appliance is very heavy. ■ kinked, crushed or altered, and Lifting it may result in injury. must not come into contact with Do not lift the appliance on any heat sources.
  • Page 8: Operation

    Safety instructions If the water hoses are altered Operation ■ or damaged, this may result Warning in material damage or Risk of explosions/fire! damage to the appliance. Laundry that has come into The water hoses must not be contact with solvents, oil, wax, kinked, crushed, altered or wax remover, paint, grease or severed.
  • Page 9 Safety instructions If there is coal dust or flour in Warning Ri s k of expl o si o ns/fi r e! ■ the air around the appliance, Risk of poisoning! this may cause an explosion. Poisonous fumes may be given Make sure that the area off by cleaning agents that around the appliance is kept...
  • Page 10: Cleaning/Maintenance

    Safety instructions If you pour the wrong Warning ■ quantity of detergent or Eye/skin irritation! cleaning agent into the Detergent and care products appliance, this may result in may spray out if the detergent material damage or damage drawer is opened while the to the appliance.
  • Page 11 Safety instructions Repairs and any other work For safety reasons, use ■ on the appliance must only genuine spare parts and be conducted by our accessories only. customer service or by an Caution! electrician. The same applies Material damage/damage to for replacing the mains cable the appliance (when necessary).
  • Page 12: Environmental Protection

    Environmental protection Sleep mode: If the appliance is not ■ Environmental operated for a prolonged period (approx. 5 minutes), the display protection panel lighting goes out before the programme starts and after the P ackaging/used appliance programme has ended, # flashes. E n v i r o n m e n t a l p r o t e c t i o n Touch any area of display panel to Dispose of packaging in an...
  • Page 13: Positioning And Connecting

    Positioning and connecting Mains lead Positioning and Bag: connecting Installation and operating ■ instructions S tandard accessories Customer Service location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the appliance for transport Note:...
  • Page 14: Installation Surface

    Positioning and connecting If the hose and mains cables are not On wooden joist floors, install the Note: ■ routed properly, there is a risk of appliance: tripping and injury. In a corner, if possible, ■ Lay hoses and cables in such a way On a water-resistant wooden board ■...
  • Page 15 Positioning and connecting Keep the screws and sleeves in b) Remove the sleeves. Note: a safe place. Fit the covers. Take the hoses out of the holders. Lock the covers firmly in place by applying pressure to the snap-in hooks. Unscrew and remove all four transport brace screws.
  • Page 16: Removing The Support Struts

    Positioning and connecting Removing the support struts Hose and cable lengths Connection on left side Unscrew and remove all screws in the vertical transport struts. Remove the transport struts. ( ~ 105 cm 0 ~ 150 cm 8 ~ 95 cm @ 0 cm ~ 100 cm Connection on right side Undo and remove the screws on the...
  • Page 17: Water Inlet

    Positioning and connecting Water inlet – Model: Standard Warning Risk of death! There is a risk of electric shock if you touch live components. Do not immerse the Aqua-Stop safety valve* in water (it contains an electric valve). * Depending on the model Observe the following when connecting –...
  • Page 18: Water Outlet

    Positioning and connecting Water outlet Connection Drainage into a siphon Warning ■ The connection point must be Risk of scalding! secured using a hose clamp with a When you are washing at high diameter of 24 - 40 mm (available temperatures, there is a risk of scalding from specialist dealers).
  • Page 19: Alignment

    Positioning and connecting Alignment Electrical connection Level the appliance using a spirit level. Warning Incorrect levelling may result in intense Risk of death! noise, vibrations and "wandering". There is a risk of electric shock if you touch live components. Loosen the lock nuts using a Never touch or hold the mains plug ■...
  • Page 20: Before Washing For The First Time

    Positioning and connecting Before washing for the first Transportation time e.g. when moving home The appliance was inspected Preparatory work: thoroughly before leaving the factory. To Turn off the water tap. remove any residual test water, run the Reduce the water pressure in the Καθαρισμός...
  • Page 21 Positioning and connecting Insert all four sleeves. Before switching on the appliance again: Notes The support struts must be ■ removed. ~ Page 16 The transport braces must be ■ removed. ~ "Removing the transport locks" on page 14 Pour approx. 1 litre of water into ■...
  • Page 22: Getting To Know The Appliance

    Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap...
  • Page 23: Control Panel

    Getting to know the appliance Control panel ( Programmes that can be selected. 0 Touch-Display 8 Start/Pause button Touch A button to start, interrupt (e.g. reload washing) and cancel the programme. @ Power button Press the # button to switch the appliance on/off.
  • Page 24: Touch-Display

    Getting to know the appliance Touch-Display Additional programme settings Programme default settings Display Setting Wash+Dry Display Setting Description — - 90° Temperature Temperature that ¾ (Cupboard can be set in °C dry+) — = cold » (Cupboard dry) 2, 400- Spin speed Spin speed in rpm ö...
  • Page 25: Laundry

    Laundry Do not exceed maximum load. Status indicators for the programme ■ Overfilling will impair the washing progress (programme sequence) result. Keep detergents and agents for the ■ pretreatment of laundry (e.g. stain remover, prewash sprays, etc.) away from the surfaces of the appliance. Using a damp cloth, immediately remove any fine spray residue and other residue or droplets.
  • Page 26: Preparing Laundry For Drying

    Laundry – Heavy: Load less laundry, need ` : You can select ■ to pretreat or soak laundry firstly. Συνθετικά (Easy-Care)/Ανάμεικτα – Stains: Remove/pretreat stains (Mix)/W Μάλλινα (Wool)/ while they are fresh. First dab Πouπouλέvια (Down)/Aθλητικά/ with soapy water; do not rub. Μικρoίνες...
  • Page 27: Overview Of Programmes

    Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Name of the programme Max. load for washing/ Max.
  • Page 28 Overview of programmes Programme/Type of laundry Options/Information Μεταξωτά (Delicates/Silk) 2.0 kg/- For delicate, washable fabrics, e.g. made of silk, satin, synthetic — - 40 °C fibres or blends (e.g. silk blouses, silk scarves). 2 - 800 rpm Speed, Eco, Z (Water plus), p (Easy iron), O (Rinse plus), T (Prewash), â...
  • Page 29 Overview of programmes Programme/Type of laundry Options/Information Καθαρισμός κάδου (Drum Clean) 0.0 kg/- Special programme for drum hygiene or fluff removal. Do not —, 40°C, 90 °C load any laundry. 1200 rpm 90°C = antibacterial programme. â (Memory), Á (Silent) 40°C = antibacterial programme, special drum cleaning deter- gent can be used.
  • Page 30 Overview of programmes Programme/Type of laundry Options/Information Πουκάμισα/ρούχα γραφείou (Shirts) 2.0 kg/2.0 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres — - 60 °C or blended fabrics. 400 - 800 rpm Speed, Eco, Z (Water plus), p (Easy iron), 2 (Hygiene care), O (Rinse plus), T (Prewash), â...
  • Page 31: Drying Table

    Overview of programmes Drying table Estimated drying time (min) Recommended drying Option Drying load ö (Iron » (Cup- ¾ (Cup- programme (kg) dry) board dry) board dry+) Βαμβακερά (Cottons)/ Speed 1.0-2.0 40-50 50-70 65-90 Avτιαλλεργικό (Allergy- 2.0-4.0 50-75 70-95 90-135 Plus) 4.0-6.0 75-90...
  • Page 32: Programme Default Settings

    Programme default settings To do this: Programme default Select a programme (except MyTime programme). settings The programme duration is displayed for the selected Y ou can change the default settings for programme, e.g. 2:30 P r o g r a m m e d e f a u l t s e t t i n g s selected programmes.
  • Page 33: Additional Programme Settings33

    Additional programme settings Speed Additional programme Washing/drying in a shorter time while settings achieving a washing/drying result that is consistent with the normal performance. You can find possible additional N ote: A d d i t i o n a l p r o g r a m m e s e t t i n g s programme settings in the overview;...
  • Page 34: O (Rinse Plus)

    Additional programme settings O (Rinse plus) Z (Water plus) Settings that can be selected: Increased water level for gentler treatment of the laundry. + 1 rinse cycle Touch Z (Water plus) to activate or + 2 rinse cycles deactivate it. + 3 rinse cycles Additional rinse cycles for particularly â...
  • Page 35: Operating The Appliance

    Operating the appliance Switching on the appliance/ Operating the selecting a programme appliance Press the # button till the indicator P reparing the appliance lamp lights up, release the button. The O p e r a t i n g t h e a p p l i a n c e appliance is switched on.
  • Page 36: Dosing And Adding Detergent And Care Products

    Operating the appliance Notes Filling the dispensers Unfold and load presorted items ■ Pull out the detergent drawer. of laundry. Mix large and small items. Washing items of different Warning size distribute themselves better Eye / skin irritation! during the spin cycle. Individual If the detergent drawer is opened items of washing may cause while the appliance is running,...
  • Page 37: Starting The Programme

    Operating the appliance Starting the programme Measuring aid A* for liquid detergent *depending on the model Touch and hold A button for 1~2 seconds, then release the button. The Position the measuring aid A for programme starts and the appliance measuring the correct amount of liquid door is locked.
  • Page 38: Adding/Removing Laundry

    Operating the appliance To deactivate the childproof lock: Cancel the programme Touch and hold the E (3s) button until For programmes washing at high the E (3s) indicator lamp is off. temperatures: Touch the A button. Adding/removing laundry To cool down laundry: Select Ξέβγαλμα...
  • Page 39: Removing Laundry/Switching Off The Appliance

    Appliance settings Removing laundry/switching Appliance settings off the appliance A utomatic switch-off Press the # button till the indicator A p p l i a n c e s e t t i n g s lamp turns off, release the button. If the appliance is not operated for a The appliance is switched off.
  • Page 40 Appliance settings End signal Brightness You can select position 1 and use the Possible setting values: 1 - 4 ˜ button to adjust the volume of the You can select position 3 and use the end signal, e.g. ‘- „. ˜...
  • Page 41: Sensors

    Sensors Appliance housing/control Sensors panel U nbalanced load detection Remove the detergent residue S e n s o r s ■ system immediately. Wipe the housing and the control ■ The automatic unbalanced load panel with a soft, damp cloth. detection system detects imbalances Do not use abrasive cloths, sponges ■...
  • Page 42: Drain Pump Is Blocked

    Cleaning and maintenance To remove the insert: Push the insert Push in the detergent drawer. upwards from below with your finger. Leave the detergent drawer open Note: so that any residual water can Clean the detergent dispenser tray evaporate. and insert with water and a brush, and dry it.
  • Page 43: The Drain Hose At The Siphon Is Blocked

    Cleaning and maintenance Take the drain hose out of the Close the service flap. retainer. Remove the sealing cap and pour the water out into a suitable container. Replace the sealing cap and place the drain hose back in the retainer. To prevent unused detergent Note: from flowing straight into the drain...
  • Page 44: Filter In The Water Supply Is Blocked

    Cleaning and maintenance Filter in the water supply is Clean the filter with a small brush. blocked Release water pressure in the supply hose: Turn off the water tap. Select the Βαμβακερά (Cottons) (activate Speed setting) programme. Select the A button. Allow the programme to run for approx.
  • Page 45: Faults And What To Do About Them

    Faults and what to do about them Press the # button. Pull out the Faults and what to do mains plug. Open the service flap. about them E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m E.g.
  • Page 46: Information On The Display Panel

    Faults and what to do about them Information on the display panel Display Cause/Remedy Flashes fast + signal: The door was opened and the water level is too high. Õ ■ Close the door, continue the programme with A button or select Άντληση (Drain) programme.
  • Page 47: Faults And What To Do About Them

    Faults and what to do about them Display Cause/Remedy The indicator lamp of Run the Καθαρισμός κάδου (Drum Clean) 90°C programme to clean and care the Καθαρισμός for the drum and the outer tub. κάδου (Drum Notes Clean) programme Run the programme without laundry. ■...
  • Page 48 Faults and what to do about them Faults Cause/Remedy The programme will not Have you touched the A button or selected ñ (Finish in) time? ■ start. Is the door closed? ■ Childproof lock activated? Deactivate childproof lock. ■ Shop mode activated? If the display shows àœ©˜ for 5 s after you have ■...
  • Page 49 Faults and what to do about them Faults Cause/Remedy The programme is taking Not a fault – the unbalanced load detection system is adjusting an imbal- ■ longer than usual. ance by repeatedly distributing the laundry. Not a fault – the foam detection system is activated – a rinse cycle has ■...
  • Page 50 Faults and what to do about them Faults Cause/Remedy Drying duration extended. Run the Καθαρισμός κάδου (Drum Clean) — (cold) programme to ■ remove fluff which has collected in the washer drum during the drying phase. If the ambient temperature is higher than 30 °C, this may extend the drying ■...
  • Page 51: After-Sales Service

    After-sales service After-sales service I f you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e (~ "Faults and what to do about them" on page 45), please contact our after- sales service.
  • Page 52: Consumption Values

    Consumption values Consumption values E nergy and water consumption, programme duration and residual moisture for C o n s u m p t i o n v a l u e s the main washing programme (approximate values) Programme Load Energy con- Water con- Programme...
  • Page 53: Technical Data

    Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 848 mm x 598 mm x 620 mm In addition to warranty claims against (height x width x depth)
  • Page 56 Free and easy registration – also on mobile phones: www.bosch-home.com/welcome Looking for help? You´ll find it here. Expert advice for your Bosch home appliances, need help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.

Table of Contents