Power-Up Modes - Toshiba NB205 Series User Manual

Power-up modes

The computer has three power-up modes:
■
Boot: Computer shuts down without saving data. Always save your
work before you turn the computer off in boot mode.
■
Hibernation: Data in memory is saved to the hard disk.
■
Standby: Data is maintained in the computer's main memory.
Refer also to the section Turning off the power in Chapter 3,
Started.
Windows utilities
You can configure various settings associated with both Standby Mode and
Hibernation Mode within the Power Options (to access it, Start
Panel
Hot keys
You can use the FN + F3 hot key to enter Standby Mode or FN + F4 to
enter Hibernation Mode - please refer to Chapter 5,
further details.
Panel power on/off
You can set up your computer so that power is turned off automatically
when you close the display panel, and turned on again when you open it.
Please note that this function is only available for Standby Mode or
Hibernation Mode, not for Boot Mode.
If the panel power off function is enabled, and you manually shut down
Windows, do not close the computer's display panel until the shut down
process has been completed.
System auto off
This feature turns the system off automatically if it is not used for a set
duration. The system shuts down in Standby mode or hibernation mode.
User's Manual
System and Maintenance
Power and Power-up Modes
Power Options).
The Keyboard
Getting
Control
for
6-12