24
TA B L E O F C O N T E N T S
B
C
D
A
E
A
A
B
≔
P R E V I O U S C H A P T E R
←
→
N E X T C H A P T E R
A
Earthing wire
B
L2 AC input wire
C
L1 AC input wire
D
Screws
E
Protect cover
Connect the AC input wires
Procedure
1. Connect the below wires:
• Protective Earth (grounding) wire (A)
• L2 AC input wire (B)
• L1 AC input wire (C)
2. Tighten the screws (D) to the correct torque. For the
specification, refer to chapter
3. Install the protect cover (E).
Insert the Ethernet conduit
Procedure
1. Remove the conduit enclosure plug (A) from the EVSE.
2. Put the Ethernet conduit (B) through the cable inlet hole.
3. Install the Ethernet conduit.
Technical data, page 32.