Installation; Introduction - Nokia Alfaskop TT/386 User Manual

Installation
Introduction
This chapter is provided to help you get your system running. It is
divided into the following five sections:
Installing the Equipment
The first section, Installing the Equipment, helps you install the
equipment.
Running the Setup Program
When you have completed the installation of the equipment, turn the
power on, insert the Setup and Maintenance diskette, and run the
Setup program.
With this program you set the date and time of the system unit's
clock and calendar and enter your system -specific configuration
parameters, if any.
Running the Maintenance Program
The third thing to do is to run the Maintenance program to ensure
that the system is functioning properly.
Installing the Disk Operating System
The last thing you have to do before you can take your system into
use is to install the disk operating system (MS-DOS) on the hard
disk.
Installing Application Software
After installing the disk operating system, you can install your
application software. Follow the instructions supplied with the
application software/program. However, to be able to install some
programs, you must change a setting in the Setup program.
Note: If something goes wrong when you start up the system, or
during the Setup or Maintenance programs, turn to the chapter Help
later in this manual.
2-3