Table of Contents
Advertisement
1.2.4.2.
1.2.5.
SWEEP TRIG INPUT
= Connection
— Impedance
— Max. input voltage
— Release criterion
SWEEP VOLTAGE
OUTPUT
— Connection
— Impedance
— Output voltage
PEN LIFT
— Connection
BNC socket at the rear side
>10kQ2
t1i5V
negative going edge of a pulse (from High to Low);
e.g. TTL signal with slew rate > 0.5 V/ms
BNC socket at the rear side
10kQ
OVto5V
(¢
)
START'
"' stop
BNC socket at the rear side
electronic switch, open during flyback,
closed during the sweep.
max. current: 200 mA
electronic switch
output voltage: < 0,7 We delones
output voltage: +22 ey
electronic switch
kQ,
internal resistance: 100
open
External sweep or frequency modulation (SWEEP INPUT)
— Connection
— Voltage vs. frequency characteristic
— Impedance
— Max. sweep range
~ Max. sweep frequency
— Sensitivity
Power supply
— Reference value
— Nominal vaues
— Nominal operating range
— Operating limits
— frequency range of operation
— Power consumption
BNC socket
linear
47kQ
2 1/2 decades
15 kHz
1V/0,2 f
where f
represents the upper limit
max.
max
of the corresponding subrange.
AC mains
220 V
110
V/128 V /220 V / 238 V, selectable by solder
links
+10 % of selected nominal value
+10 % of selected nominal value
47,5 — 105 Hz
25 W
Advertisement
Table of Contents
