Motorola A920 Service Manual page 33

Level 1 and 2 Service Manual
6881024B40-A
To Replace the Transceiver Board
1. Align the transceiver board with the rear housing and set it in place. If
necessary, press gently to make sure the board is fully seated in the housing.
2. Insert and tighten the two screws, using the T-6 Torx driver. Do not
overtighten.
3. Replace the PCH, front housing, USIM, battery, and battery door as described
in the procedures.
October 27, 2003
Disassembly
27