Kenwood KX-880G Instruction Manual

STEREO CASSETTE TAPE DECK
KX-880G
INSTRUCTION MANUAL
KENWOOD
TRIO-KENWOOD CORPORATION
@©PRINTED IN JAPAN B50-5926-00(M, E, K)(G)
86/12 1110987654321 /85/12 11 10
Introduction
Your choice of this product indicates that you are a devotee Installation notes
to excellence in sound reproduction. @ Install the unit on a flat, vibration-free rigid table.
We appreciate your patronage and take pride in the long tra- @ Do not place the unit near a heat producing equipment
dition of quality components. such as a radiator. Avoid direct sunlight.
So that you can get the most out of your unit, we suggest @ The unit may not function properly if used at extremely
that you take the time to read through this manual before low, or freezing temperatures. The ideal ambient temper-
you hook up and operate your system. This will acquaint ature is above +5°C (41°F).
you with operating features, and system-connection consi- @ Do not store or use the unit in a dusty location or in a
derations, so that your listening pleasure will be enhanced moist atmosphere. Select a location where air is well
right from the start. You will notice that in all aspects of ventilated.
planning, engineering, styling, operating convenience and @ Keep the unit away from a source of magnetic fields such
adaptability, we have sought to anticipate your needs and as TV sets, speaker systems, radios, motorized toys or
desires. magnetized objects.
Keep this manual handy for future reference. @ Operate the unit on rated power supply voltage (+ 5%).
Irregular power voltage will result in incorrect operation.
For your records
Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial numb-
ers whenever you call upon your dealer for information or
service on this product.
Model Serial Number
Unpacking
Unpack the unit carefully and make sure that all accessories DOLBY and the double-D symbol are trademarks of Dolby
and cables are put aside so they will not be lost. Laboratories Lincensing Corporation.
Examine the unit for any possibility of shipping damage. If Noise reduction circuit made under license from Doby Lab-
your unit is damaged or fails to operate, notify your dealer oratories Licensing Corporation.
immediately. If your unit was shipped to you directly, notify
the shipping company without delay. Only the consignee
(the person or company receiving the unit) can file a claim
against the carrier for shipping damage.
We recommend that you retain the original carton and pack-
ing materials for use should you transport or ship the unit in
the future.