Sony XM-C6000 Service Manual

XM-C6000
Canadian Model
AEP Model
E Model
SPECIFICATIONS
Power supply system Crossover slope 12 dB/oct
Pulse power supply circuitry 18 dB/oct (bass only)
Speaker impedance
Low boost O— +10 dB (40 Hz)
2—8 ohms Power requirements
Maximum power output (4 ohms)
12 V DC car battery (negative
: ; a ground)
High/Front | Mid-range/ oe Source voltage 105—16V
speaker Rear speaker | stereo | monaural Current drain 43. A (at rated output)
150 Wx2| 350W 53 A (at 10% THD)
Dimensions Approx. 590 x 70 x 280 mm (w/h/d)
Rated power output (4 ohms) Weight Approx. 11.4 kg
a Accessories supplied
High/Front
| Mid-range/ Low
Mounting screws (8)
speaker Rear speaker stereo
monaural
Protection plate (1)
USE UW Ke oe ands Design and specifications subject to change without
50 Hz—20 kHz |50 Hz-20 kHz }20-140 Hz | 20-140 Hz notice.
0.08% THD |0.08% THD 0.08 THD 0.5% THD
Frequency response
High/Front: 50 — 100 kHz (+8 dB)
Mid range/Rear: 50-100 kHz (*3 dB)
Low: 8~140 Hz (*3 dB)
(Rear/Mid-range output terminals:
50 — 150 kHz)
Harmonic distortion
Less than 0.005% 4 ohms
(Rear/Mid-range output terminals:
less than 0.003%)
input level adjustment range
0.2-8V
S/N ratio More than 105 dB (IHF-A, WTD)
Crossover frequency
High/Front (Hi-Pass Filter)
HPF:50 Hz*, 70 Hz*, 3.5 kHz,
5 kHz (*2-way only)
Mid-range/Rear (Hi-Pass Filter)
HPF:50 Hz, 70 Hz, 100 Hz,
140 Hz
LPF: 2.4 kHz, 3.5 kHz, 5 kHz,
FLAT
Low (Low-Pass Filter)
LPF: 50 Hz, 70 Hz, 100 Hz,