Installing The Headlight Mask With The Headlight; Changing The Headlight Bulb - Husqvarna 125 XC-W 150 2017 Owner's Manual

15 ELECTRICAL SYSTEM
15.6

Installing the headlight mask with the headlight

15.7

Changing the headlight bulb

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
(All XC‑W/XC‑W Six Days models)
–
Detach plug-in connector
light.
E00357-10
Main work
(All EXC/EXC Six Days models)
–
Connect plug-in connectors
E00356-11
(All XC‑W/XC‑W Six Days models)
–
Connect plug-in connector
E00357-11
–
Position the headlight mask and fix it with rubber bands
The holding lugs engage in the fender.
–
Position the brake line and wiring harness in the brake line guide.
E00355-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (

and take off the headlight mask with the head-

.

.
p. 97)
p. 94)
95

.