Before Applying Power - Kenwood 106VR Instruction Manual

Before applying power
Units are designed for operation as follows.
10BVR/105VH (En)
zL
Caution: Read this section carefully to ensure safe operation.
AC120 V only Europe and U.K.
.
AC 230 M only
AC 240 V only China and Russia
.
AC 220 \f only
^_
^Other countries
.
AC 110 120/220 240 Vswitchable
*AC voltage selection
US A. and Canada
Australia
.
The AC voltage selector switch on the rear panel is set to the voltage
that prevails in the area to which the unit is shipped. Before connecting
the power cord to your AC outlet, maKe sure that the setting position
of this switch matches your (me voltage If not, it must be set to your
voltage in accordance with the following direction.
Note:
Our warranty does not cover damage caused Dy excessive line voltage
due to improper setting of the AC voltage selector switch.
AC voltage selector switch
Move switch lever to match your line voltage
with a small screwdriver or other pointed tool.
^OfOty precautions a caution: Head this section carefujly to ensure sate operation.
WARNING; TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THi^^^^^^
APPLIANCE TO RAIN OR MOISTURE.
A
CAUTION
i
RISK OF ELECTRC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK) NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALI¬
FIED SERVICE PERSONNEL
THE LIGHTNING FLASH \A'ITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS IN¬
TENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN
THE PRODUCT S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF
ELECTRIC SHOCK TO PERSONS
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USERTO
THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE APPLIANCE
Unpacking
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost Examine the unit for any possibility of shipping damage
If your unit IS damaged or fails to operate, notify your dealer immediately If your unit was shipped to you directly, notify the shipping company without delay.
Only the consignee (the person or company receiving the unit) can file a claim against the earner for shipping damage. We recommend that you retain the
original carton and packing materials for use should you transport or ship the unit m the future.
Accessories