Husqvarna BMG 555 P Operator's Manual page 10

2. Make sure that the filters in the dust extractor are
clean and not damaged.
3. Connect the dust extractor hose to the connection
for dust extractor. Refer to
3 for information about where the connection for dust
extractor is on your product.
To connect the water supply
CAUTION:
prevent dirt blockage in the water system.
WARNING:
and connections away from water.
WARNING:
extractor when wet grinding.
1. Connect the water kit to the water connector on the
product.
2. Connect the water hose to the water kit.
3. Start the water flow.
CAUTION:
become slippery when you do the wet
grinding procedure.
CAUTION:
water pressure than 30 psi. The water is
only to prevent dangerous dust in the air.
If water is necessary for your operation,
speak to a Husqvarna service agent for
more information.
Handle positions
• Operation position of the handle:
10
Product overview on page
Use only clean water to
Keep all electrical cables
Do not use the dust
The surface can
Do not use a higher
• Transport position of the handle:
• Servicing position of the handle:
1991 - 001 - 02.06.2023