Table of Contents
Advertisement
Product Overview
1. Button latch
2. Trigger lock
3. Front handle
4. Oil cap
5. Trigger
1. Battery charger Model
88610 (included with
Model 51870)
Figure 8
6. Bar cover knob
7. Guide bar cover
8. Cutting guide
9. Guide bar and chain
Figure 9
2. Battery pack Model 88620
(included with Model
51870)
Specifications
Model
Bar Length (with 88619 and
88621 equipped)
Chain Gauge (with 88619
and 88621 equipped)
Chain Pitch (with 88619 and
88621 equipped)
Chain Length (with 88619
and 88621 equipped)
Rated Voltage
Weight (without a battery)
Charger Type
Battery Type
g374230
*If you are using this machine with a battery pack
that is 4.0 Ah or greater you must install the included
quick-release harness for proper support and balance.
Appropriate Temperature Ranges
Charge/store the battery pack
at
Use the battery pack at
Use the tool at
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack, and battery charger in an
enclosed clean, dry area.
g330065
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous.
14
51870/51870T
25.4 cm (10 inches)
0.050 inches
1/4 inch
58 links
60V DC maximum, 54 VDC
nominal usage
4.1 kg (9 lbs)
Toro 60V lithium-ion chargers
Toro 60V lithum-ion batteries*
5°C (41°F) to 40°C (104°F)*
-30°C (-22°F) to 49°C (120°F)*
0°C (32°F) to 49°C (120°F)*
Advertisement
Table of Contents
