Universal Battery Charger (Ubc) Adapter; Setup; Spare Battery Charging - Motorola MC31 Series Integrator Manual

Connect the MC31XX connector end to the MC31XX Communication/Charge cable to the mobile computer.
2.
For more information on communications setup procedures, see

Universal Battery Charger (UBC) Adapter

CAUTION Ensure that you follow the guidelines for battery safety described in
The UBC Adapter can be used with a power supply as a standalone spare battery charger or it can be used with
the four station UBC2000 to simultaneously charge up to four spare batteries. For additional information on the
UBC 2000, refer to the UBC 2000 Quick Reference Guide, p/n 70-33188-xx.

Setup

Connect the UBC Adapter to a Motorola approved power source.
AC Line Cord
UBC Adapter Setup
Figure 2-20

Spare Battery Charging

To charge spare batteries:
Insert the spare battery into the spare battery charging slot, bottom first.
1.
Pivot the top of the battery down onto the contact pins.
2.
Accessories 2 - 21
Chapter 3, ActiveSync.
Battery Safety Guidelines on page
Power Port
DC Cable
Power Supply
8-1.